Documentation for ACFA PSIM 1.3.

Previous page Setting Startup Rules  Configuring automatic generation of HID events Next page

To configure the host PCs' connections to a controller, go to the controller's setup panel and click Host PCs.

The Host PCs window opens.

To configure a connection:

  1. To add a connection, click Add (1).

    Note:

    To delete a connection, select the relevant row in the table and click Delete(2).
  2. In the Time between pings column, enter the time interval between two consecutive pings (3).

  3. In the Max host ping count column, enter the maximum number of pings for the host PC (4).

    Note:

     The maximum allowed ping count is 99.
  4. If this is a LAN/WAN connection, go to the Connection via LAN/WAN column and select the checkbox (5).

  5. If this is a PPP connection, go to the Connecting user name column and enter the user name(6).

    Note

    If this is a LAN/WAN connection, enter * in this field (set by default).

  6. In the PPP script file name column, enter the PPP script file name (7).

    Note:

    If this is a LAN/WAN connection, enter * in this field (set by default).
  7. In the IP Address or host name column, enter the host PC's IP address (8).
  8. In the Communication channel column, enter the communication channel associated with this IP address (9).
  9. If needed, in the Shared seed column, enter the value to be used both by the host PC and the controller (10).
  10. Click Apply to save the changes. This also brings you back to the controller's setup panel (11).

Note:

To come back to the controller's setup panel without saving the changes, click Cancel (12).

The connection is now configured.