Documentation for ACFA PSIM 1.3.

Previous page Configuring the Gate controller parameters  Configuring Gate reactions Next page

The Gate ACS supports four operation modes of user access card.

Card operation mode

Description

Card only

Only card is sufficient for access

Card and pin

Card is to be confirmed by PIN-code for access

Master

Only card is sufficient for access + it is confirmation card for access card of Slave type

Slave

Card is to be confirmed by confirmation card (Master type)

Set one or more of specified modes to users to configure the access modes.

To configure the access modes of users, do the following:

  1. Go to the Access Manager module (see the Guide for configuring and working with the Access Manager integration module). Double-click the user to start editing. Locate the Others section in the dialog box opened.
  2. From the Ravelin Access type drop-down list select the user access mode (1). If the mode is not selected the access will be granted according to the access level.
  3. From the Ravelin guest card drop-down list select Yes if user is a guest (2).
  4. Click the Save button.
  5. To configure access modes for all users repeat steps 1-3 for each of them.
  6. If the dynamic forwarding the controller configuration is set, the access modes will be enabled immediately. Otherwise forward the data of the Access Manager module to the Gate controller (see Managing the configuration of a Gate controller section).

Configuring of access modes is completed.