Documentation for ACFA PSIM 1.3.

Previous page Introduction into SNMP Wrapper Settings Guide  Configuration of the SNMP Wrapper integration module Next page

SNMP Wrapper is licensed for 1 channel.

Note

1 channel corresponds to 1 SNMP trap sent by the device when an event occurs. As a rule, one event equals one SNMP trap, but some devices send several SNMP traps with different data per event. For example, the UPS generates a Power Failure event and sends two SNMP traps “No External Power” and “Current Charge Level”. Therefore, to determine the number of licenses, it is necessary to clarify the required list of SNMP traps in the official documentation of the device manufacturer.

Systems which operation is guaranteed by SNMP Wrapper universal integration are as follows:

NameFunctionality in the Axxon PSIM software packageComment
AVTECH - Room Alert 24E- Alarm Switch

Monitoring of the following events:

  • Humidity is out-of-bounds;
  • Humidity is within borders;
  • Cabinet open;
  • Cabinet close;
  • Temp is out-of-bounds;

  • Temp is within bounds;

  • Power loss;

  • Power connected.
The license is per sensor (e.g. Internal Humidity Sensor, Power Sensor, etc.)
MOXA Remote I/O Series cards of any type: Ethernet I/O, RS-485 I/O or Modular I/O (for the list of all cards which can be connected by the SNMP please refer here)Receive the current state of connected sensors.The license is per sensor connected to input, i,e, the number of licenses is equal to the number of inputs used.
NAG SNR-ERDReceiving status and events from controller elements, for example, temperature sensors, relay status (on, off)
TFortisDevice status poll.
  • No labels