Documentation for ACFA PSIM 1.3.

Previous page Configuring the Virdi Terminal  The Virdi Terminal operation settings Next page

The Virdi terminal connection is configured as follows:

  1. On the settings panel, go to the Network tab.
  2. In the Terminal IP field, enter the IP address of the terminal.
  3. In the Terminal Subnet field, enter the terminal subnet mask.
  4. In the Terminal Gateway field, enter the terminal gateway.
  5. Set the Dynamic IP checkbox if the terminal operates in a network with the DHCP protocol.
  6. In the Server IP field, enter the IP address of the ACFA PSIM Server.
  7. In the Server port field, enter the port of the ACFA PSIM Server.
  8. Click the Apply button to apply the settings.
  • No labels