Supported hardware and licensing of the Forteza module

Manufacturer

Okhrannaya technika, LLC

Integration type

Low-level protocol

Equipment connection

RS-485

Supported equipment

Equipment	Function	Features
Forteza-Adapter	Adapter of external devices	Converts signal from voltage free output to RS-485 interface Provides possibility of connection two detecting devices
Forteza-Controller	Controller of executive devices	Provides control of two devices, transmitting information about relay contact state
FM Series	Microwave monostatic sensors	Division of detection area into 12 sub zones Several modifications with length of detection area for 84, 60, 30 m. Authorized access by disabling sub zones
Forteza series	Microwave bistatic sensors	Several modifications with length of detection area for 500, 300, 100, 50 m. Up to four-frequency letters – eliminates ambient illumination from other sensors Wirking frequency 24 GHz
Security Light LED series	LED seachlight	Control of lighting level Missing of ambient illumination of video surveillance cameras by means of directed focused lighting Continuous light flux in all range of power supply Resistant to low input voltage drops
MIR-M series	Dual-technology monostatic sensors	Several modifications with length of detection area for 30, 10 m. High survivability Two different physical principles of detection are applied: monostatic microwave and monostatic infrared Division of detection area into 12 sub zones
RELIEF series	Wire&Wave sensor	Self-diagnostic and fault indication modes are supported Ability to install on all types of barriers Protection of fences of complex configuration, tracking relief and perimeter turns
MIR-B series	Dual-technology bistatic sensors	Several modifications with length of detection area for 50, 100 m. High survivability Two different physical principles of detection are applied: microwave and active infrared Ultra narrow detection area
LIANA series	Vibration sensor	Registration and analysis of the signal from the mechanical vibrations of the fence when attempting to take it or destroy it (climbing, sawing, cutting the fence) Registration and analysis of the signal from the deformation or vibration of the ground (when digging under the fence) Stability of the product characteristics, high level of detection, interference immunity

License Protection

Per 1 COM-port.

No more than 32 devices can be connected to one COM-port.

Forteza-Adapter converts the signal from the dry relay contacts to the RS-485 interface. Two sensors can be connected to one Forteza-Adapter. Dry contacts from the sensors connect to Forteza-Adapter, and information about the dry contacts state is transmitted via the RS-485 interface from the adapter to Axxon PSIM.

Forteza-Controller is intended for connecting actuators to the security system and controlling them with the "normally-open" relay contacts. For example, a siren is an actuator.

Page tree

Documentation for ACFA PSIM 1.3.