Previous page List of Terms used in the ApolloSDK Integration Module Settings Guide  Configuration of the ApolloSDK integration module Next page


On the page:
 

Purpose of the document

This ApolloSDK Module Settings Guide is a reference manual designed for ApolloSDK Module configuration technicians and operators. This module functions as part of security- and fire alarm systems and access control systems built on the basis of the ACFA Intellect Software System.

This Guide presents the following materials:

  1. General information about the ApolloSDK integration module;
  2. Configuration of the ApolloSDK integration module;
  3. Working with the ApolloSDK integration module.

General information about the ApolloSDK integration module

Attention!

The ApolloSDK integration is not supported starting from version of Intellect 4.10.0 and ACFA Intellect 6.0.

The ApolloSDK integration module is part of SFA/ACS systems built based on the ACFA Intellect Software System. It is designed to configure and control ApolloSDK hardware.

The following hardware is integrated with the ACFA Intellect Software System:

  1. AAN controllers (an ACS component);
  2. AIM interface modules (an ACS component);
  3. AIO alarm panels (an SFA component);
  4. ASA status panels (an SFA component).

The network connection for these devices is either Ethernet or RS-485.

Note:

 Detailed information about the ApolloSDKsystem can be found in the official documentation (manufacturer AAM Systems).

Attention!

The ApolloSDK software must be installed on the Server for the ApolloSDK integration module to operate.

Before configuring the ApolloSDK integration module, the following actions must be performed:

  1. Install the required hardware on the site.
  2. Install the ApolloSDK software on the Server.