Previous page Configuring BioSmart PROX v.2 and BioSmart PROX-E controllers  Configuring operation mode of controller Next page


Access parameters are configured as follows:

  1. Select the controller operation mode in the Identification mode dropdown list (1). When the off-line mode is enabled, then controller is responsible for providing access, when the server mode is enabled – Server of ACFA Intellect is responsible for providing access.
  2. To enable tamper housing control set the On value for the corresponding parameter (2). In this case when the controller housing is tampered, the corresponding event and alarm occur.
  3. In the Number of tampering attempts field specify the number of failed access attempts by any identifier – if the specified number of failed access attempts is exceeded, then the controller will be locked out for Locking timer while tampering (see step 4, 3).
  4. In the Locking timer while tampering field specify the time (in seconds) of locking controller when the number of failed access attempts is exceeded (4).
  5. Click the Apply button to save all changes.

Access parameters are now configured.