Data monitoring is set up as follows:

  1. Go to the ATM-Intellect Workstation setting panel.
  2. Click the Monitoring… button. The dialog box to set up monitoring appears.
  3. Go to the Retranslation tab (1).

  4. If Central Security Console (CSC) is installed on CCRVS, enable the Forwarding alarm messages option and specify the corresponding IP address and TCP port (2).

    Note.

    This setting is for compatibility with old versions of ATM-Intellect. It is not used in current versions. 

  5. If system health information of the local video surveillance systems must be transmitted to ATM-Intellect Workstation TC, enable the Forwarding status info option in the opened panel (3). Specify the IP address and the TCP port of the PC on which ATM-Intellect Workstation TC is installed.
  6. To control the normal operation of the Data loader for Monitoring of ATM-Intellect Workstation, the following configurable parameters are used:
    1.  ID is the unique ID number of ATM-Intellect Workstation (4).
    2. Threshold (files) is the number of files in the exchange folder of the Data loader, on exceeding which the message Software error (Data loader) is sent to ATM-Intellect Workstation TC (5).
  7. Click OK (6).

Configuring data monitoring is completed.