Documentation for ATM Intellect 12.0. Documentation for other versions of ATM Intellect is available too.

Previous page ATM Intellect Workstation TC configuring sequence  Setting the ATM-Intellect Workstation TC connection parameters Next page

Note

ATM-Intellect components (ATM-Intellect Pro, ATM-Intellect Workstation and ATM-Intellect Workstation TC) can work in a distributed configuration, while all the listed objects see where each of them is installed and can be configured.

To create necessary ATM-Intellect Workstation TC objects, do the following:

  1. Go to the Hardware tab of the System settings dialog box.
  2. Create the IIDK Interface object. Set the ID number of the IIDK Interface object.
  3. Create the ATM-Intellect Workstation TC object on the basis of the Computer object. On the settings panel of this object, in the IIDK interface field, enter the identifier of the previously created IIDK Interface object.
  4. Create the required number of child Surveillance Object objects on the basis of the ATM-Intellect Workstation TC object. When you create these objects, specify the same ID as in the ID field on the settings panel of the corresponding Surveillance object object created on the basis of the ATM-Intellect Pro object.

Note.

The ID and Name fields must not contain underscores (_) or backslashes (\), the ID field is limited to 9 characters and must not contain spaces.

The address of the ATM can be specified as the object name.

Objects creation is completed.