Documentation for ATM Intellect 12.0. Documentation for other versions of ATM Intellect is available too.

Previous page Configuring sound notification at ATM Intellect Workstation  Configuring the ATM-Intellect Workstation from another server in a distributed configuration Next page

Data gateway is needed when live video is transmitted from ATM-Intellect Pro to Additional workplace in another subnet and ATM-Intellect software components are not united in the distributed video surveillance system, as so as in this case Video gate object cannot be used.

The Data gateway objects are created on the computers with ATM-Intellect Workstation installed. The number of the Data gateway objects must be equal to the number of ATM-Intellect Pro to receive live video from. For example, if there are 10 ATM-Intellect Pro, then create 10 Data Gateways with Local port and Remote IP-address corresponding to those ATM-Intellect Pro.

In this section, the description of Data gateway configuration is given. By default, this module is not enabled for live video transmitting to Additional workplaces. In order to enable Data gateway, set the View live video through the gate in the ATM Monitoring interface object settings panel – see Configuring the ATM Monitoring object.

Data gateway object configuration is performed as follows:

  1. Create the Data gateway object based on the Computer object on the Hardware tab of the System settings dialog box (1).
  2. In the Local port field enter the number of the port  in the system for connection of Additional Workplaces (2).
  3. In the Remote IP-address field enter IP-address of the ATM-Intellect Pro (3).
  4. In the Remote port field enter the standard port of the ATM-Intellect Pro (4). Do not change the default value in most cases. It is to be changed only if by some reason the system uses intermediate server with port forwarding.
  5. Click Apply (5).

Data gateway object configuration is completed.

  • No labels