Documentation for ATM Intellect 12.0. Documentation for other versions of ATM Intellect is available too.

Previous page Ignoring objeсts  The number of alarms displayed on the Log panel Next page

On page:

General information

The status bar displays:

  • CC - the start of the displayed period for the current cell column.
  • LL - the time when the data was last loaded into the database.
  • OB - the total number of "not ignored" objects.
  • FO - the number of objects with hardware problems displayed at a given time.
  • Cam - the camera statistics: total number of cameras at the facilities/number of working cameras/number of faulty cameras.
  • IF% - the video surveillance system functioning rate.
  • IN% - the video surveillance system non-functioning rate by reasons.

You can hover the mouse cursor directly over the status bar to display a tooltip.

Important!

If filtering is enabled, then in order to calculate rates (IF% and IN%) and camera statistics (Cam) only for filtered objects, click  (Calculate rates and cameras only for filtered table lines).

Functioning and non-functioning rates

Note

Functioning (IF%) and non-functioning (IN%) rates are calculated only for “not ignored” objects. For “ignored” objects, rates are not calculated and the filter is never used (see Ignoring objects). Zero values of non-functioning rates are not shown on the status bar.

Rates (IF% and IN%) are not calculated if Alarms, Failures or Disconnected filter is enabled (see The number of alarms displayed on the Log panel).

Functioning rate (IF%) is calculated according to the following formula:

(1-Nnf/Na)*100, where

  • Nnf is the number of objects that do not function properly.
  • Na is the total number of objects

The non-functioning rate (IN%) for a particular reason is calculated according to the following formula:

(Nnfbr/Na)*100, where

  • Nnfbr is the number of objects that do not function properly for this particular reason
  • Na is the total number of objects