Documentation for Auto Intellect 5.3. Documentation for other versions of Intellect is available too.

Previous page Setting up the permitted vehicle speed  Selecting the parameters of Radar device installation Next page

The Auto-Intellect software module supports the wide list of Radar type devices. Selecting of connected device is performed via Speed traps server object corresponding to the configured Radar software.

To select the model of Radar device do the following:

  1. Open the Hardware tab in the System Settings window (1).
  2. In the object tree on the left side of the Hardware tab, select the Speed-trap server object representing the Radar module to be set up. The settings panel of the selected object will open on the right side of the window (2).

  3. Specify the model of Radar device from the Model list of supported devices (3).

    Attention!

    Correct operation of the Iskra-1, Iskra-1B, Iskra-1D, Iskra-1KRIS models is not guaranteed.

  4. Click Apply (4).

The process of selecting the module of Radar devise is completed.