Documentation for Auto Intellect 5.5. Documentation for other versions of Intellect is available too.

Previous page Previewing and printing the event data  Viewing the videо archive by event Next page


The Active tracking database is the Auto-Intellect software package database and is filled up by operator via the Vehicle Tracer module.

Note.

It is impossible to remove and change records via the Vehicle Tracer module except changing the stolen vehicle status.

For total interaction between the Active tracking database and the Vehicle Tracing module the following conditions should be met:

  1. The Active tracking database should be connected to the Auto-Intellect software package as an external plates database.
  2. This external database should be used by the Vehicle Tracer module for analyzing the identified plates.

If the following conditions are met, the interaction between the Active tracking database and the Vehicle Tracer module is done in the following way:

  1. The operator adds the vehicle LP to the Active tracking database via the Vehicle Tracer module, and specifies the reason of its adding. 
  2. The Vehicle Tracer module compares the passing vehicle LP with the LPs stored in the Active tracking database. If the correspondence between these LPs is set, the alarm is generated.

Active tracking option is convenient to be used in the Auto-Intellect distributed system, as it enables the operator at his workstation to notify the remote workstation operators about the vehicle that is to be captured.

Editing the data about the vehicle in the Active tracking database is done in the following way:

  1. Click the External Plates DB in the main menu of the Event search in the Recognizers DBs window.
  2. As a result Internal SVDBs dialog window will open.
  3. Click Enter to add records to the database.

  4. Enter the vehicle LP number in the License plate number field (1).

    Note

    To enter a two-line LP number, use two underscore characters "__" as a line separator, for example: 123ABC__TH777.

  5. If the fact of vehicle driving to the vehicle report by all boundaries is to be checked, do the following:
    • Set the Check the fact of driving checkbox (2).
    • Enter the time period using the up-down buttons and select the measuring unit from the drop-down list (3).
  6. Enter the description of reason by which the vehicle report is created in the Additional information field (4).

  7. Click Save to save changes (5).

    Note.

    Click Cancel to cancel changes (6).

    Note.

    Entered vehicle reports are added to the database with the Active status.

  8. Go to the All reports of vehicles found in DB tab to change the status of vehicle report.

  9. The list of vehicle reports in database is displayed in the table (1):
    • In the Number column, the LPs on the wanted list are displayed.
    • In the Date and Time column, the time of adding the vehicle report to the database is displayed.
    • In the Operator column, the operator who added the vehicle report to the database is displayed.
    • In the Comment column, the reason by which the vehicle report is created is displayed.
    • In the Active column, the checkboxes are set for the active vehicle reports.

  10. To search the vehicle in the table, enter the search request in the LP field and click the Search button (3). The records corresponding to the search request will be highlighted with red in the table.

    Note

    The data is searched in the following fields: Number, Date and Time, Operator, Comment.

  11. To change the reports status, in the Active column (4) set the checkboxes for those vehicle reports which should be active and uncheck checkboxes for those reports which should be inactive.
  12. Click Edit to edit the selected vehicle report (5).
  13. Click Delete to remove the selected vehicle report (6).
  14. Click Refresh to refresh the list of vehicle reports (7).
  15. Click Save to save changes (8).

Adding the vehicle data to the External Plates Database is completed.

  • No labels