Documentation for Auto Intellect 5.6. Documentation for other versions of Intellect is available too.

Previous page Setting up the LPR channel  Setting up the video recording parameters Next page


To set up the LPR channel, specify the main camera for LP number recognition, and an additional synchronous camera, if necessary.

The main recognition video camera is directed at the driving lane. The additional video camera covers the same area as the main video camera, but it can be mounted in another place. The two video cameras can be controlled synchronously using scripts or macros.

Example. Gas filling station. The main video camera is directed at the incoming lane and recognizes the LP numbers of approaching cars. The additional synchronous video camera is mounted at the side of the lane and monitors the fueling process.

To select the video cameras, do the following:

  1. Go to the LPR channel object settings panel, corresponding to the activated module (see Activating the software module used for identifying the plates).

  2. From the License plates recognition drop-down list (1), select a required Camera object (the main camera for LP number recognition).

    Note

    The same camera can be used for various LPR channels.

  3. From the Synchronous recording drop-down list (2), select a required Camera object (the additional synchronous camera).

    Attention!

    Frames recording from the synchronous video camera is performed only if permanent record by both video cameras is performing.

  4. If it is necessary for the LPR channel to consider the vehicle's movement direction as Entry to the territory, set the Entry checkbox (3).

    Note

    This setting is taken into account in the Intellect Web Report System when working with Auto reports (see Intellect Web Report System. User Guide).

  5. Click the Apply button (4).

The camera selection is completed.

  • No labels