Documentation for Auto Intellect 5.6. Documentation for other versions of Intellect is available too.

Previous page The Speed traps server module setup procedure  Selecting the video camera for Speed traps server and LPR channel joint operation Next page


Speed-traps are connected to the server via the COM port. Any number of speed-trap devices can be connected to Auto-Intellect, depending on customer needs.

Specialized protocol is used for data exchange with the speed-traps via the COM port. Each Speed-trap uses its individual protocol for data exchange.

Several COM ports should be set up one by one. Each speed-trap device is represented by a separate Speed traps server object created and set up in the Hardware tab of the System Settings window.

To set up a COM port for speed-trap connection, do the following:

  1. Go to the Speed traps server server object settings panel (2).
  2. In the Port drop-down list, select the COM port to connect the speed-trap (3).
  3. Click Apply (4) to save all changes.

The speed-trap is now connected to the server.

  • No labels