Documentation for Face Intellect 7.4. Documentation for other versions of Intellect is available too.

Previous page Configuring the grouping of similar faces  Configuring the Face recognition and search interface object Next page

FIRSERVER events

To configure the Face Recognition Server operation with a thermal camera, do the following:

  1. Create and configure an embedded detector in Intellect for the thermal camera, from which it is necessary to receive the face temperature data (see Embedded detectors).
  2. Go to the settings panel of the Face Recognition Server object. Go to the Analytics tab.
  3. In the Threshold field (1), enter the temperature in degrees Celsius; when this value is exceeded, the Temperature rise (TEMPERATURE_ALARM) event will be generated.
  4. Set the Combined work with thermal camera checkbox (2) if it is necessary that the FIND_PERSON event is generated only when the temperature is received from the thermal camera or after the time, specified in the Thermal camera reply timeout, sec parameter.
  5. Set the Get photo from thermal camera checkbox (3) if it is necessary to receive photos of captured faces from the thermal camera, not from the video camera.
  6. In the Thermal camera reply timeout, sec field (4), enter the timeout in seconds for the reply from the thermal camera with the temperature.
  7. Click the Apply button (5).

Configuring the Face Recognition Server operation with the thermal camera is now completed.

Note

When the debug mode is enabled (see Enabling and configuring the debug mode of Intellect software), a log file firserver.thermal_imager.log will be created in the <Intellect installation directory>\. All information received from the thermal camera is logged into this file.

Also, you can enable saving json and images received from the thermal camera during face recognition to the folder using the SaveThermalJson registry key (for details, see Registry keys reference guide).

  • No labels