Documentation for Axxon Next 3.6.4. Documentation for other versions of Axxon Next is [available too].

Previous page Switching Relays  Voice notification Next page

To configure switching to a PTZ camera preset, you must perform the following steps:

  1. Add the Go to preset rule (see Adding an automatic rule).
  2. In the Telemetry list (1) select a Telemetry object that matches the PTZ device of the PTZ video camera. The pan/tilt unit of any PTZ camera can be used, including one tied to another server (if it is enabled).
  3. In the Preset number list (2), select the number of the camera preset to which the camera should switch when the detection tool is triggered.
  4. To save changes, click the Apply button.

Configuration of switching to a PTZ camera preset is now complete.