Documentation for Axxon One 2.0. Documentation for other versions of Axxon One is available too.

Previous page Configuring pan/tilt angle for cameras with Immervision lenses in 180 degrees Panorama display format  Adding links to other cameras to the Surveillance window Next page

Switching to layout editing mode

If you have created a water level detector for a camera (see Configuring the Water level detector), you can see the water level sensor in the Surveillance window.

You can also display the numerical value of current water levels for the sensor. To do it, follow the steps below:

  1. In the text field, enter "{0.00}" and additional text if necessary. For example, "Water level: {0.00}".

    Note

    If you enter "{0.00}", then a fractional number with 2 digits after the point will be displayed (see Displaying the number of detected objects).

  2. To configure fonts, click .
  3. Use buttons to scale up/down the text and the sensor icon.
  4. You can move the sensor just as any other object (see Moving input and output icons in the Surveillance window).

When the layout is saved, you see the information displayed in the Surveillance window.

  • No labels