Click  (Show inspector Ctrl+I). A special area appears. This area contains short information about the currently selected object. The lower part contains the Fields tab.

The information is shown (according to the options selected) as columns in the main list of the Log Panel.

To get more detailed information about an object, select it in the Log Panel and click (Show detailed information). The Details window opens.

In the Details window, click  (Show inspector Ctrl+I). A special area appears. The upper part of this area contains information about the currently selected object.

Note.

If the Owner Panel is in use, then information about only the objects that belong to the owner selected on the Owner Panel is displayed in the Details window. To view the details about all system objects, call this window on the Owner Panel – see Viewing details on alarms for all system objects.

The lower part of the area contains three tabs: Fields, Archives, and Cameras. The information is shown (according to the options selected) as columns in the main list of the Detailed information window.

  

The data in the Cameras, Disk (GB), Disks, and Version fields and in all the fields in the Archives and Cameras tabs are filled in automatically when packets with technical information are received from the objects. If these fields are empty for an object, it means that the object never connected yet.

The Cameras field shows the number of cameras for the object.

The Disk (GB) field shows the maximum free space for all the logical disks where recording is performed.

The Disks field shows the number of logical disks where recording is performed.

The Version field shows the version of Conrol Agent installed at the object.

The fields in the Archives tab show the depth of the video archive in days for each camera.

The fields in the Cameras tab show the current status of each camera (on/off).

The IP address field displays the IP address of the object.

The First record field shows the date of the very first entry in the video archive from all cameras.

Field Disk temp. shows the temperature of the hard drives separated by a comma if there are several disks.

The CPU Load,% field shows the CPU load as a percentage (updated every 15 minutes).

The Memory, MB field shows the amount of available physical memory in MB.

The Work duration field shows the time of continuous operation of the Intellect.exe\Intellect64.exe process on the object in the format "d hh:mm",
where "d" - day "hh" - hours "mm" - minutes.

Note.

The video archive depth is determined by Agent Of Control as follows:

The system calculates the actual number of days when a given camera recorded data to the archive.

Example: The video surveillance system has been working for three days. A camera recorded data on the first and the third days. The camera was turned off on the second day. Thus, for this camera, the archive depth equals two days.

Click the button  (Show hardware data). A special area appears.There you can see changes for these values (Cameras, Disk (GB), Disks, Version and others).