Documentation for Monitoring 13.0. Documentation for other versions of Monitoring is available too.

Previous page Status bar  Object status Next page

The number of objects shown in the Log Panel or Control panel is defined by the current filter if it is enabled with the filtering button  (Turn filter on/off).

The left list allows to show objects with alarms of failures only, the connected or disconnected objects only. The middle list shows time periods. If there was an alarm during the selected period, it is included on the list. The right list shows the alarm durations that trigger the filter. For example, if you set the filter to "Current - 1 minute", only those objects are shown that are currently in the alarm state and that have already been in this state for 1 minute or more. If you set the filter to "Day- 5 hours", only those objects are shown that have at least once been in the alarm state in the last 24 hours and that were in this state for at least 5 hours.

To calculate rates (IF% and IN%) and camera statistics (Cam) only for filtered objects, click  (Count indexes and cameras only in filtered table strings). If Alarms, Failures or Disconnected filter is enabled, rates are not calculated.