Page History

The Uragan module can be set to record the video image received by the camera. If this function is enabled, the recording starts automatically when the LPR channel recognizes an LP number. The duration of the recording can also be specified.

To enable automatic recording functionality and to specify the recording duration, do the following:

1. In the System Settings dialog window, open the Hardware tab.
2. Select the LPR channel, corresponding to the activated program module, in the objects tree on the Hardware tab (see . «Program Activating the program module activation, used for Plates identification», see Fig. 7.2—9identifying the plates section, 2). The settings panel of the selected object will open on the right side of the window.
   

...

1. Image Added
2. Check the Auto record recording checkbox to enable recording the video upon recognizing an LP number (3).

3. In the field next to the checkbox, specify for how many seconds the video should be recorded after LP number recognition (4).

   Info
   title Note.
   Zero (0) in this field means that the recording starts at the moment of LP recognition and continues indefinitely.

4. Click Apply (5).

The auto recording setup is complete.