Page History

Every IP device used for audio input is registered in INTELLECT™ by creating and configuring the Audio card object. The Audio card objects are created in the Hardware tab under the Computer object. When creating the Audio card objects in the Board drop-down list select the value corresponding to the designation of IP audio device followed by its IP-address. This value is available in the drop-down list only if the Video capture device object corresponding to the IP-device is created and configured (see Configuring video acquisition from IP devices section). Also the Audio card and Video Capture device objects corresponding to the one IP-device should be created on the basis of the same Computer object.

When the Audio card is configured restart INTELLECT™. Otherwise the audio subsystem (particularly, microphones) can not be configured.

...