Configuring audio acquisition from IP devices

Every IP device used for audio input is registered in INTELLECT™ by creating and configuring the Audio card object. The Audio card objects are created in the Hardware tab under the Computer object. When creating the Audio card objects in the Board drop-down list select the value corresponding to the designation of IP audio device followed by its IP-address. This value is available in the drop-down list only if the Video capture device object corresponding to the IP-device is created and configured (see Configuring video acquisition from IP devices section).

When the Audio card is configured restart INTELLECT™. Otherwise the audio subsystem (particularly, microphones) can not be configured.

Microphones embedded into or connected to IP devices are registered in INTELLECT™ by creating the Microphone objects under the Audio card object. Under one Audio card object there are the Microphone objects in amount corresponding to the amount of audio input channels and restrictions applied by a license key. Corresponding segment of hardware branch when IP device and one microphone are registered is shown in the figure.

When the Microphone object is created, select the channel number of connecting the microphone to audio input device in the Channel dropdown list.