Versions Compared

Old Version 4

changes.mady.by.user Sofya Uyutova

Saved on

compared with

New Version 5

changes.mady.by.user Sofya Uyutova

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Create a SIP-device object based on the SIP-terminal object of the SIP-server type (1). The object settings panel will be displayed on the right side of the System Settings dialog box.

  2. From the Device type drop-down list (2), select the icon type used to display the device on the Map.

  3. In the User ID field (3), enter the SIP-device identification number, i.e. the number to call it.

  4. In the IP address field (4), enter the SIP-device IP address. If you are not going to send data to the SIP-device, this field is optional.

  5. In the Password field (5), enter the password specified on the SIP-device. The SIP-device with the specified identifier will be connected to Intellect only if the passwords on the device and in Intellect are identical.

  6. Set the Video switch (6) to the position corresponding to the video camera used for calls:

    1. Off — the video is not used during the call.

    2. SIP сameracamera — a SIP-device camera connected via the SIP protocol is used. If the wrong device is selected by default in the Camera (7) drop-down list, change the selection. The corresponding Camera object may not be created in the Intellect objects tree at this step; in this case, it will be created automatically after clicking the Apply button (10).

    3. Other — any other camera from the Intellect hardware tree is used. In this case, select the name of the required Camera object from the Camera drop-down list (7).

  7. Set the Audio switch (8) to the position corresponding to the microphone used for calls:

    1. Off — the audio is not used during the call.

    2. On — the microphone of the SIP-device is used. If the wrong device is selected by default in the Microphone drop-down list (9), change the selection. The corresponding Microphone object may not be created in the Intellect objects tree at this step; in this case, it will be created automatically after clicking the Apply button (10).

  8. Click Apply (10).

  9. If necessary, the pre-configured missing Camera and Microphone objects (11) will be automatically created in the Intellect objects tree.

...