Versions Compared

Old Version 5

changes.mady.by.user Roman Nazarov

Saved on

compared with

New Version 6

changes.mady.by.user Gleb Matskevich

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

SIP-terminal is designed to implement IP telephony within the distributed system configuration. IP telephony can be implemented with or without physical SIP-devices. Thus, the SIP-terminal allows organizing single and group calls between operators and SIP-devices in the Server/Remote Admin Workstation/Remote Client configurations.

Info
titleNote

SIP-devices are IP devices, mainly intercoms and call panels, connected to Intellect via the Session Initiation Protocol (SIP).

The Intellect can act both as a server and as a SIP client, and client. The SIP server for the Intellect's SIP client can use be either third-party Asterisk software or the Intellect's SIP server as a SIP server.

SIP-devices are configured on the settings panel of the SIP-terminal object created on the basis of the Computer object on the Hardware tab of the System Settings dialog box, and also on the settings panel of its child objects — SIP-operator and SIP-device.

The SIP-terminal (both server and client) is configured in the following order:

  1. Configure the Intellect SIP server (see Configuring the Intellect SIP server).
  2. Configure the Intellect SIP client (see Configuring the Intellect SIP client)
  3. Select the terminal type.
  4. Specify the terminal network settings.
  5. Create and configure the objects corresponding to the SIP-devices.
  6. Create and configure the objects corresponding to address books (see Configuring the SIP -device operatorsTerminal Address Book).
  7. Configure the special numbers of the terminal .Configure the numbers of the terminalnumbers (see Configuring Special Numbers of a SIP Terminal in Intellect).
  8. If necessary, create and configure the macros to work for working with the a SIP-devicesterminal (see Macros for working with a SIP terminal).
  9. Configure the interface objects to work with the SIP-devices.
  10. Configure the SIP Panel interface object to work with the SIP-devices.
Info
titleNote

Despite the general configuration procedure, the steps 2-4 are different.

  1. terminal numbers (see Configuring SIP-terminal numbers in Intellect software package).
  2. Select a speaker, microphone, and camera for each SIP-operator (see Selecting a speaker, microphone, and camera for a SIP operator).
  3. If you need to work with SIP-devices and SIP-operators from the map, add the corresponding objects to the map (see Attaching objects to an interactive map layer).
  4. Configure the SIP Panel interface object (see

...

SIP Panel

  1. Configuring the SIP-panel interface object).
Tip

SIP Panel