Go to documentation repository
Page History
...
Events are processed in the Current events tab of the Operator protocol.
...
Current events
Events registered by alarm objects with no type assigned and events escalated from a lower level are displayed in the Current events tab. The event control panel is at the top of the tab, cells with and the information on events are is at the bottom of the tab.
Depending on the Operator protocol configuration, current events can be displayed as of cells or lines (see Operator protocol).
The number of horizontal cells is determined by the Operator protocol window width. However, the Operator Protocol can be configured in such a way that the cell size fits the size of the free area under the event control panel; in this case only one cell is horizontal, and its height is equal to the height of the free area.
Depending on the Operator protocol configuration, the events are displayed in the order they are received or by the priority and importance, ascending or descending. When there is ascending sorting - the newest (of higher priority) event is in the upper left corner or on the top line, when there is descending sorting - it is in the bottom right corner or on the bottom line.
If one or several event cells events are selected by the Operator, then their position in the Operator protocol is not changed and new events continue appearing in the window - they shift in accordance with the sorting order. At the same timeIn this case, the Operator Protocol protocol can be configured in such a way that the newly received event when a new event is received, its cell or line automatically becomes active.
...
To assign a type to the event, select one or several event cells of the event or lines using the left mouse button (hold down the Ctrl key to select several cellsevents, if this feature is enabled in the system settings) and then click one of the buttons on the event control panel. The buttons for event processing may not be available until a comment is entered if the corresponding setting is enabled. If the helping guides were added during the Operator Protocol configuration, you can click the 
button and open the helping guide about the event processing.
| Info | ||
|---|---|---|
| ||
If the events are grouped, then selecting a line with an unopened grouping will select all events from this grouping. |
The button names can be changed during the Operator Protocol configuration.
| Info | ||
|---|---|---|
| ||
When selecting you select the event cell or line, the camera (linked to the corresponding object) activation event is generated. If the Active monitor is configured in the system (see Configuring the display mode for camera boxes section in Administrator's Guide), then video from the corresponding camera is displayed in it. If several cells are selected, then cameras are displayed one-by-one on the Active monitor. |
After the type is assigned to the event, it is removed from the Current events tab in the Operator protocol window. If the event (after being processes) is not removed from other Operator protocols when configuring the Operator protocol (see Setting the options for handling events in the Operator protocol section in Administrator's Guide), then the processed event is marked grey in other Operator protocol windows. But other operators can process this event once again.
| Info | ||
|---|---|---|
| ||
If all non-processed events are to be assigned with the type of the selected event, then set the Apply to all checkbox. |
In order to delay the event processing once for the time period specified when configuring the Operator protocol, click the Delay button. The event will not be removed from the Operator protocol windows and it will not be marked grey in in other Operator protocols.
| Info | ||
|---|---|---|
| ||
If the time of waiting the respond from operator (specified in the settings of the Operator protocol object) (see Administrator's Guide) is exceeded, then the event is escalated and if the superior chief interface is not assigned to the Operator protocol, then it is removed from the Current events tab and the Non-processed type is assigned. | ||
| Info | ||
| ||
If all non-processed events are to be assigned with the type of the selected event, then set the Apply to all checkbox checked When Intellect is restarted, the non-processed events are saved. |
Frames, archive and the Map
If the bookmark for the selected events is to be created in the archive, then set the Set the bookmark checkbox checked before processing the event. The comment will be used as the bookmark name. See List of bookmarks.
To zoom in the alarm frame (event screenshot)If the events are displayed as cells, then the frame of the moment of alarm (screenshot of the event) can be enlarged. To do this, double left-click on it. The window with zoom-in frame appears. This window can be moved around the screen by dragging the title bar with the left mouse button; in this case, the position of the window will be remembered for each type of event and window of the Operator Protocol. To close this window, click the X button in the upper right corner or press Esc on the keyboard.
...
Overview
Content Tools