Go to documentation repository
Page History
...
| Info | ||
|---|---|---|
| ||
From within the map, you cannot switch the status of the Output if there are macros with the corresponding action running in the system. |
Commands for controlling macros are listed in the table below.
Command (context menu item) | Condition | Command description |
Start | Event-driven macro | Running the macro. |
Enable | Disabled cyclic macro | Enabling the macro. |
Disable | Enabled cyclic macro | Disabling the macro. |
On top of that, you can manage macros with the Start button and the Enable check box.
Commands for controlling counters are listed in the table below.
Command (context menu item) | Condition | Command description |
Stop | The counter is running | Stopping the counter. If the counter is on pause, its value does not change. |
Start | The counter is stopped | Starting the counter. If the counter is running, its value changes as specified. |
Clear | Any state | Resets the counter value to 0. |
Overview
Content Tools