Controlling devices from the map

You can manage devices on the map (video cameras, Outputs) by using the context menus of the corresponding icons. You can control devices in all modes.

Commands for controlling video cameras are given in the table below.

Command (context menu item)	Condition	Icon status after the command is performed
Arm	The camera is disarmed
Private Arm Arming and Disarming a Video Camera	The camera is disarmed
Disarm	Camera armed

Commands for controlling outputs are given in the table below.

Command (context menu item)	Condition	Icon status after the command is performed
Turns the output on	Output in normal status
Disable output	Output is activated

Note

From within the map, you cannot switch the status of the Output if there are macros with the corresponding action running in the system.

Commands for controlling macros are listed in the table below.

Command (context menu item)	Condition	Command description
Start	Event-driven macro	Running the macro.
Enable	Disabled cyclic macro	Enabling the macro.
Disable	Enabled cyclic macro	Disabling the macro.

On top of that, you can manage macros with the Start button and the Enable check box.

Commands for controlling counters are listed in the table below.

Command (context menu item)	Condition	Command description
Stop	The counter is running	Stopping the counter. If the counter is on pause, its value does not change.
Start	The counter is stopped	Starting the counter. If the counter is running, its value changes as specified.
Clear	Any state	Resets the counter value to 0.

Page tree

Documentation for Axxon Next 4.6.0. Documentation for other versions of Axxon Next is available too.