Go to documentation repository
Page History
You can manage devices Using the context menu of icons on the map (video cameras, Outputs) by using the context menus of the corresponding icons. You can control devices in all modes, you can control outputs and logical objects (counters, macros), as well as control video cameras and configure their interface.
Commands for controlling and configuring video cameras camera interface are given in the table below.
Command (context menu item) | Condition | Icon status Result after the command is performed |
Arm | The camera is disarmed | Icon status: |
Private Arm | The camera is disarmed | Icon status: |
Disarm | Camera The camera is armed | Icon status: |
| Show video | Video image is not displayed | Video image display: |
| Hide video | Video image is displayed | Video image is not displayed |
| Show layout | Additional conditions are not required | The selected camera is displayed on the temporary layout. To display multiple selected cameras on the temporary layout, see Selecting Cameras for a Temporary Layout |
| Copy | Additional conditions are not required | If you right- or left-click on any cell of the layout, then the video from the copied video camera will be displayed in this cell. The copied camera will be displayed on the layout until you switch to another layout or restart the client |
Commands for controlling outputs are given in the table below.
Command (context menu item) | Condition | Icon status after the command is performed |
Turns the output on | Output in normal status |  |
Disable output | Output is activated |  |
| Info | ||
|---|---|---|
| ||
From within the map, you You cannot switch the status of the Output from the map if there are macros with the corresponding action running in the system (see Switch output). |
Commands for controlling macros are listed in the table below.
Command (context menu item) | Condition | Command description |
Start | Event-driven macro | Running the macro. |
Enable | Disabled cyclic macro | Enabling the macro. |
Disable | Enabled cyclic macro | Disabling the macro. |
On top of that, you can manage macros with the Start button and the Enable check box.
...
Command (context menu item) | Condition | Command description |
Stop | The counter is running | Stopping the counter. If the counter is on pause, its value does not change. |
Start | The counter is stopped | Starting the counter. If the counter is running, its value changes as specified. |
Clear | Any state | Resets the counter value to 0. |
Overview
Content Tools