Page History

Use of Axxon One through a Web-client Client takes place remotely, through a Web browser and the TCP/IP protocol. Remote video surveillance via a Web browser does not require installation of Axxon One.

To start the web clientWeb-Client:

1. Start a web Web browser.

2. In the address bar, type the address of the Axxon One Server in the following format: <web server IP address>:<Port>/<Prefix>.

   Tip
   Connecting the Web and Mobile Clients to the Server behind NAT

   
   

   Note
   title Attention!
   The Server URL is case-sensitive. You have to type in the URL using the exact case of characters specified in settings (see Configuring the Web Server).

   

   Note
   title Attention!
   If the web server Web-Server is properly configured (see Configuring the Web-Server), then a secure HTPPS connection is automatically established.

   
   

3. Enter a username and password for connecting to the Axxon One Web-Server.
   

   Note
   title Attention!
   After 5 successive failed authorization attempts, the user is blocked for 10 minutes.

   
   

...

To switch between users, press the Change Useruser link in the upper-right corner; another authentication will follow.

...