Documentation for Axxon One 1.0.

Previous page Hardware and software requirements for the Web-Client operation  Web-Client's GUI Next page

Use of Axxon One through a Web-Client takes place remotely, through a Web browser and the TCP/IP protocol. Remote video surveillance via a Web browser does not require installation of Axxon One.

Attention!

Opera browser supports Web-Сlient starting from version 15.

In the Windows OS, the Web-Сlient for Safari browser is not supported.

To start the Web-Client:

  1. Start a Web browser.

  2. In the address bar, type the address of the Axxon One Server in the following format: <web server IP address>:<Port>/<Prefix>.

    Connecting the Web and Mobile Clients to the Server behind NAT

    Attention!

    The Server URL is case-sensitive. You have to type in the URL using the exact case of characters specified in settings (see Configuring the Web Server).

    Attention!

    If the Web-Server is properly configured (see Configuring the Web-Server), then a secure HTPPS connection is automatically established. 

  3. Enter a username and password for connecting to the Axxon One Web-Server.

    Attention!

    After 5 successive failed authorization attempts, the user is blocked for 10 minutes.

This will show the Web-Сlient interface. By default, the first listed layout will be displayed. If there are no layouts, the Cameras panel opens on the left and shows the video from the first listed video camera.

To switch between users, press the Change user link in the upper-right corner; another authentication will follow.

Note

The name of the current user is indicated near this point.