Versions Compared

Old Version 2

changes.mady.by.user Alena Kniazeva

Saved on

compared with

New Version 3

changes.mady.by.user Gleb Matskevich

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Go to the Options tab → Settings →PTZ Settings (1-2).

  2. Set the operator idle time in hours, minutes and seconds (3). When the time runs out, the PTZ control is unlocked automatically if the operator did not carry out perform any actions.
  3.  By default, if the higher priority user controls the PTZ camera, then the PTZ control panel displays the name of the user. To disable the display of this information, unset clear the corresponding checkbox (4).

  4. Set  theJoystick device sensitivity (5, see Joystick Configuration). The sensitivity range will depend depends on the value specified in the device model repository for a particular device.

    Info
    titleNote

    For example, it the following is written specified in the Axis T8311 device model repository:

    Code Block
    <property id="deviceSensitivity" xsi:type="PropertyIntRangeType">
<value>
<min>5</min>
<max>100</max>
<default>50</default>
</value>
</property>

    The working range will be This means that the sensitivity for this device can be set in the range from 5 to 100 for this device.


  5. Click the Apply button.

You have configured PTZ control is now configured.

Tip

Controlling a PTZ Camera

Creating and configuring roles

...