Page History

To configure the audio subsystem if SIP-device in the Axxon PSIM software, do the following:

1. On the Hardware tab, select the Computer object corresponding to the Intercom Subsystem Server.
   Image Modified
2. Click the right mouse button on the Computer selected object and choose the Create object - > Audio Card item from the context menu.
3. In the opened box, set the number and name of Audio Card object and then click Apply button.
   Image Modified
4. As a result, the settings panel of Audio Card object will display.
   Image Modified
5. From the Plate drop-down list, select the IpCam SIP <IP-address> value where <IP-address> - IP-address of SIP-device (1).
6. To save changes, click Apply button (2).
7. Create the Microphone object corresponding to the microphone of SIP-device. On the Hardware tab, select the Audio Card object created on 1-6 steps.
   Image Modified
8. Click the right mouse button on the selected Audio Card object and choose the Create object - > Microphone item from the context menu.
9. In the opened box, enter the number and name of Microphone object and then click Apply button.
   Image Modified
10. As a result, the settings panel of Microphone object will display.
    Image Modified
11. From the Channel drop-down list, select the IpCam SIP <IP-address> LineIn(#0) value, where <IP-address > - IP address of SIP-device.
12. To save changes, click Apply button.
13. Create the virtual microphone for mixing audio stream from the microphone and audio stream receiving to speaker of SIP-device to the single audio stream. Repeat steps 7-10 for it.
14. From the Channel drop-down list, select the IpCam SIP <IP-address> LineIn(#1) value where <IP-address > - IP address of SIP-device and click Apply button.
    Image Modified
15. Repeat steps 1-14 for all required SIP-devices.

...