Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

FACE Intellect

Registry section

String parameterAvailable valuesDefaultProduct versionParameter in effect

x32: (x32)\FRS
x64: (x64)\FRS

CpuCoreCount>0
6.0

The key defines on how many CPU cores the face recognition module will operate (firserver.run process). All cores are in use by default.

x32: (x32)\FRS
x64: (x64)\FRS
FaceLostAge>010006.0

The key sets the timeout upon which Face Server ‘loses’ the face if there is no new data about it.

x32: (x32)\FRS
x64: (x64)\FRS
GenFirsInDetector0, 116.0

Sets the parameters of generating and attaching face biometrics in the detection tool:

1 – Face detection tools generate and attach face biometrics to the photo. 

0 – Face detection tools do not generate face biometrics - the face is only captured.

Note. Face recognition Server that performs search in the user database checks up whether it has attached biometrics when it gets a face photo. If yes, then biometrics are not further generated for search in the database - data attached to the photo is in use. If no, then recognition Server generates biometrics itself using the photo. 

Generation of biometrics is a resource-intensive process unlike search by ready data - that is why this key allows distributing load among several Servers having only one Server working with the user database.
x32: (x32)\FRS
x64: (x64)\FRS
SaveUnrecognizedFaces0, 106.0 to 6.1

Specifies what data will be stored in the database when using the Face recognition Server:

1 - all captured faces.
0 - only the faces about which there are recognition results.

The key is in use in order to avoid the database overflow.

Note. Starting from version 7.0, to minimize the amount of information stored in the database, it is recommended to use the UseFaceDB key.

x32: (x32)\Video\FaceCapture
x64: (x64)\Video\ FaceCapture
timeUntilLost>01Intellect 4.10.0

The key is used to configure the face detection tool – it sets time on the expiry of which the face is considered lost.

For instance, if timeUntilLost = 1 and a man covers his face with the hands in front of the camera and then shows it again, then the face detection tool does not capture it as it considers that the face was lost for the time it was covered.

If the parameter value is 3, then the face will be detected in this case.
x32: (x32)\FRS
x64: (x64)\FRS
IgnoreSamePeople0, 106.1The key enables function of ignoring repeatedly recognized faces. While enabling this function all vectors of captured faces are saved in cache for the specified time interval. When new face is captured, its biometric vector is comparing with already existed vectors in cache. If it coincides with one of such vectors with specified similarity rate then it doesn't send to the further processing. Duration of vector storing in a cache is specified using the Skip repeated recognitions, sec parameter of the Face Recognition Server object. Similarity rate for comparison is came from the Similarity level parameter of the same object. See also Face Intellect software package. Administrator's Guide, section Setting parameters for detected faces recognition.
x32: (x32)\FRS
x64: (x64)\FRS
ClearIgnoreCache0, 106.1The key enables cache clearing while using function of ignoring repeatedly recognized faces.
x32: (x32)\FRS
x64: (x64)\FRS
ClearIgnoreCacheTimeTime in HH:MM:SS format-6.1The key sets time when cache crearing is to be performed while using function of ignoring repeatedly recognized faces.
x32: (x32)\FRS
x64: (x64)\FRS
FaceDetectionPeriod>02506.1Specifies time period in milliseconds equal to frequency of new faces search on the image for the Tevian recognition algorithm. See also Face Intellect software package. Administrator's Guide.
x32: (x32)\FRS
x64: (x64)\FRS
FaceDBFull path to a local or network folder-7.0The key sets a folder for storage of images and vectors for captured and sample faces when UseFaceDB key is set to 1 or 2 (see below).
x32: (x32)\FRS
x64: (x64)\FRS
UseFaceDB0, 1, 227.0

The key sets the storage mode for metadata, images and vectors of captured and reference faces.

0 - metadata, images and vectors are stored only in the database.

1 - metadata, images and vectors are stored in the database, and images and vectors are also stored in a folder on disk. The path to the folder is set by the FaceDB parameter (you can specify both local and network folders).

2 - metadata is stored in the database, and images and vectors are stored only in a folder on disk. The path to the folder is set by the FaceDB parameter (you can specify both local and network folders).

Note 1. Metadata is stored in the database in the Hits table, regardless of the value of the UseFaceDB key.

Note 2. Images of reference faces are stored in the <Intellect software installation directory>\Bmp\Person folder, regardless of the UseFaceDB key value.

Note 3. Starting from Face Intellect version 7.1.0.1161 only the UseFaceDB = 2 mode is supported, which is set automatically when Face Intellect starts if a mode other than this is detected.

x32: (x32)\FRS
x64: (x64)\FRS
FaceDBFreeMB>010007.0The key is used if the the UseFaceDB parameter value is 1 or 2 (see above). The key sets the size of free disk space in megabytes. Once the specified size is reached, the old images, vectors and metadata of captured faces will be deleted. The cleanup is performed on a loop in portions equivalent to 1000 megabytes.
x32: (x32)\FRS
x64: (x64)\FRS
RestPortport number100007.1The key is used in case the standard port 10000 used by the Face Recognition Server to communicate with the Face Recognition and Search client is occupied by a third-party application that can not be disabled. The key allows you to specify a new port number for communication between the server and the client.
x32: (x32)\FRS
x64: (x64)\FRS

CpuCoreCountAddPerson

>=007.1

The key defines the number of CPU cores where the vectors of persons are generated when adding a reference face to the database.

0 - vectors are generated on the number of cores specified in the CpuCoreCount key. The cores are used successively. Recognition sample is bound to each core. 

- only 1 fixed core (different from those specified in CpuCoreCount) is in use when adding a reference face to the database. 

2 - only 2 fixed cores (different from those specified in CpuCoreCount) are in use when adding a reference face to the database.

etc.
x32: (x32)\FRS
x64: (x64)\FRS

Face.HardwareCPU

0, 1, 2-7.1

The key defines the order of binding streams to CPU cores when generating vectors of persons.

no value or 0 - streams are bound randomly to CPU cores.
1 - streams are bound successively to CPU cores depending on their total number. 
2 - streams are bound to first cores of each CPU.

x32: (x32)\FRS
x64: (x64)\FRS
Face.RecognizeFacesSeparately0, 107.3 and later

Mechanism of displaying faces. When a new mechanism of displaying is enabled, the photo in the list of captured faces is not duplicated - it is updated in the same cell while the tracker "sees" it.  

0 - new mechanism of displaying faces. 

1 - old mechanism of displaying faces. 

x32: (x32)\FRS
x64: (x64)\FRS
FaceDetector.SaveLastFaceCaptureFrame0, 107.1 and later

The key enables saving the last recognized face and all its necessary data to a file. This image file can be sent directly to the recognition server via the iidk_client utility.

0 - General operation mode.

1 - When the face is captured, the captureFrame (cam_N) .log file is created (where N is the camera number that captured the face) in the <Intellect Installer directory>\Modules (64)\ folder. This file will contain the last recognized face and all its necessary data. This image file can be sent directly to the recognition server via the iidk_client utility.

Note. The file is overwritten every time a new face is captured.

x32: (x32)\FRS
x64: (x64)\FRS
XSize>=019207.0 and later

The key restricts resolution (width) of the photo when adding it to the faces database.

Set greater value to the key if the following message appears when adding a face to DB: "Adding error. The face was not added. Insufficient image quality to add".

x32: (x32)\FRS
x64: (x64)\FRS
YSize>=010807.0 and later

The key restricts resolution (height) of the photo when adding it to the faces database.

Set greater value to the key if the following message appears when adding a face to DB: "Adding error. The face was not added. Insufficient image quality to add".
Tevian




x32: (x32)\FRS
x64: (x64)\FRS
TevianAlgorithmNumber0, 107.0-7.1

The key enables selecting the Tevian algorithm.

0 – less resource intensive algorithm is in use

1 – more resource intensive algorithm is in use 

Important! Biometric vectors received using this algorithm cannot be used with alternative one. For proper operation of Face Intellect after changing this parameter biometric vectors are to be converted as described in Transition between face recognition modules section. 

x32:(x32)\FRS\CustomAlgoritm
x64:(x64)\FRS\CustomAlgoritm
Tevian.DetectionFilterAlgorithm0, 107.3 and later

An alternative algorithm for filtering false triggerings of the tracker. This key is in use if Tevian.GlobalTrackingDetectionFilter=0 and Tevian.DetectionFilterValue > 0 (see the corresponding parameters below). 

0 - ALG1

1 - ALG2

Note. It is not recommended to change this parameter without consulting Tevian.

x32:(x32)\FRS\CustomAlgoritm
x64:(x64)\FRS\CustomAlgoritm
Tevian.DetectionFilterValue0-100507.3 and later

Configuring alternative algorithm filtering. It is in use if the value of Tevian.GlobalTrackingDetectionFilter is more than 0 (see the corresponding parameter below).

Note. It is not recommended to change this parameter without consulting Tevian.

x32:(x32)\FRS\CustomAlgoritm
x64:(x64)\FRS\CustomAlgoritm
Tevian.GlobalTrackingDetectionFilter0, 117.3 and later

Activates an additional check to filter out false triggerings of the tracker. If faces in masks are not recognized, it is recommended to disable this check, however, this can cause false triggerings of the tracker.

0 - disabled

1 - enabled.

Note. It is not recommended to change this parameter without first consulting with Tevian.

x32:(x32)\FRS\CustomAlgoritm
x64:(x64)\FRS\CustomAlgoritm
Tevian.DetectorAlgorithm0, 107.3 and later

Face detection operation mode (identification). The recommended parameter value is 0.

0 - ALG1

1 - ALG2

Note. It is not recommended to change this parameter without consulting Tevian.

x32:(x32)\FRS\CustomAlgoritm
x64:(x64)\FRS\CustomAlgoritm
Tevian.FaceDetectionPeriod>=03507.3 and later

This parameter affects the detector captioning capacity. If there is a great value, the tracks can rend.

Note. It is not recommended to change this parameter without consulting Tevian.

x32:(x32)\FRS\CustomAlgoritm
x64:(x64)\FRS\CustomAlgoritm
Tevian.FaceDetectorConfidenceThreshold>=0507.3 and later

Face detector confidence threshold (do not confuse with face quality).

Note. It is not recommended to change this parameter without consulting Tevian.

x32:(x32)\FRS\CustomAlgoritm
x64:(x64)\FRS\CustomAlgoritm
Tevian.IdentificationAlgorithm0, 1, 207.3 and later

The key enables selecting the Tevian algorithm for recognition and face search.

0 - ALG1 less resource-intensive algorithm is in use.

1 - ALG2 identification of the higher quality, but more resource-intensive.

2 - PRECISE the highest quality of recognition, but the most resource-intensive. This algorithm is recommended if significantly less time is spent on face recognition than on detection (if there are few people in the frame).

Important! Biometric vectors received using this algorithm cannot be used with any other one. For proper operation of Face Intellect after changing this parameter biometric vectors are to be converted as described in Transition between face recognition modules.

x32:(x32)\FRS\CustomAlgoritm
x64:(x64)\FRS\CustomAlgoritm
Tevian.TrackBestFramesCount>=017.3 and later

Specifies the number of seconds to accumulate the best frames of a track for recognition. The increase in time makes it possible to average out the recognized face characteristics, but it can result in the poorer accuracy of the face characteristics recognition.

Note. For example, if the 1 second value is set, the average error in determining the age will be 2-3 years, and if the 5 seconds value is set, it will be 3-4 years.

x32:(x32)\FRS\CustomAlgoritm
x64:(x64)\FRS\CustomAlgoritm
Tevian.TrackerMaxLostTime>=05007.3 and later

Time since the last recognition after which the track is considered ended.

Note. It is not recommended to change this parameter without consulting Tevian.

x32: (x32)\FRS\CustomAlgoritm
x64: (x64)\FRS\CustomAlgoritm
Tevian.EyesClosedDetectorThreshold>=0507.3 and later

Sets the sensitivity of the closed eyes recognition. The higher the value, the less sensitive the closed eyes detector.

x32: (x32)\FRS
x64: (x64)\FRS
GenerateEyesClosedEvent0, 107.3 and later

Activates the Eyes closed event generation when closed eyes are detected.

x32: (x32)\FRS
x64: (x64)\FRS
FaceTracker.LogTrackerQuality0, 107.3 and laterThe key enables logging of every face capture event in the general log file of the Face Recognition Server debugging window, where additional information is displayed, such as: the quality of the captured face, the number of all captured faces, the number of high-quality faces, etc. (for details, see Appendix 2. Debug window).
x32: (x32)\FRS\Cloud
x64: (x64)\FRS\Cloud

Face.PollTime

>=02007.3 and later

The key specifies the polling time of the HUAWEI server in milliseconds.

Note. Face-Intellect requests the events only since the time it is launched. If events contain an earlier time than the launch time of Face-Intellect, these events will be ignored. That is why the HUAWEI server time and the Face-Intellect time should be synchronized.

...

AUTO Intellect

Registry section

String parameter

Available values

Default

Product version

Parameter in effect

x32: (x32)\LPRVIEWER
x64: (x64)\LPRVIEWER

protocollimit

<1000

-

4.7.5 and later

Sets number of lines shown in the protocol (this parameter is for testing only).

x32: (x32)\radar
x64: (x64)\radar

EmulateRefreshSpeed

1 - 2147483647

100

4.7.5 and later

Radar emulator. Sets time period (ms) for refreshing data about speed in the radar emulation mode. 0 value blocks data refreshing.

x32: (x32)\radar
x64: (x64)\radar

WriteSpeedOnTitles

0, 1

0

4.7.5 and later

Defines whether to write speed values on titles.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

DisableUrmOutput

0, 1

0

4.7.5 and later

Disables results output.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

GlobalUrmDebug

0, 1

0

4.7.5 and later

Enables displaying CZoneInfo objects in dbgview. 

x32: (x32)\URMLPR
x64: (x64)\URMLPR

OneSpeedDetect

0, 1

0

4.7.5 and later

Enables filtering the radar speed values.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

ReadSpeedFromTitles

0, 1

0

4.7.5 and later

Defines whether to read speed from titles or not.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

TestWidth

-

0

4.7.5 and later

 Image width change (internal use only).

x32: (x32)\URMLPR
x64: (x64)\URMLPR

TestHeight

-

0

4.7.5 and later

 Image height change (internal use only).

x32: (x32)\URMLPR
x64: (x64)\URMLPR

Time

-

-

4.7.5 and later

Saves time of the last viewed archive fragment in the test mode.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

UrmDebug

0, 1

0

4.7.5 and later

Enables recording of  tiff files to UrmDebug folder.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

UrmSendProcessEvents

0, 1

0

4.7.5 and later

Sends beginning (VEHICLES_BEGIN) and ending (VEHICLES_END) parameters of license plate recognition to the core.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

UseTry

0, 1

0

4.7.5 and later

Enables the seh module.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

WriteUraganErrorBuf

0, 1

0

4.7.5 and later

If failure occurs, the uragan.buf file is created (only of UseTry=1). 

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

CountryName

Text

RUS

4.7.5 and later

Sets the test country name.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

Enabled

0, 1

0

4.7.5 and later

Enables/disables test.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

ExecuteSecond

> = 0

3

4.7.5 and later

Sets time of test execution.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

Number

Text

M038EH150

4.7.5 and later

Sets the test number.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

PlateHeightPercent

> 0

15

4.7.5 and later

Sets the test license plate height.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

PlateWidthPercent

> 0

25

4.7.5 and later

Sets the test license plate width.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

ParkingMode

0, 1

-

5.0

Enabling the parking mode for the CARMEN-Auto recognizer:

1 – parking mode is enabled. Recognition starts at ULPR|START reaction. As soon as one license plate is recognized, the recognition stops.

0 – parking mode is disabled. Recognition continues till getting the ULPR|STOP reaction. 

Important! For correct operation of the key make sure that the Enable on motion detection trigger checkbox is set on the settings panel of the LPR channel object corresponding to the CARMEN-parking recognition module (see Setting the joint operation of the LPR channel and the motion detector of the Intellect platform).

Note. The ULPR|START and ULPR|STOP reactions are created using the scripts. Operator command, sensor triggering, motion detection tool triggering, etc. can cause the reaction.

5.5 and later

Enabling the parking mode for the CARMEN-Auto recognizer:

1 – parking mode is enabled. Recognition starts at ULPR|START reaction. As soon as one license plate is recognized, the recognition stops.

0 – parking mode is disabled. Recognition continues till getting the ULPR|STOP reaction. 

Note. If you set the 1 value on the settings panel of the LPR channel object, the Enable on motion detection trigge checkbox will be automatically set without the possibility of removing it until this key value is set to 0 (see Setting the joint operation of the LPR channel and the motion detector of the Intellect platform).

Note. The ULPR|START and ULPR|STOP reactions are created using the scripts. Operator command, sensor triggering, motion detection tool triggering, etc. can cause the reaction.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

SaveRawRecognitionResult0,105.1

When value = 1, the key allows saving frames transmitted from Intellect to the CARMEN Parking / CARMEN-Auto module.

  • For CARMEN Parking the frames are saved to the following folders:
    < Intellect installation folder>\Modules\CPD_RawResults\idDetector\ - frames with data for recognition.
    <Intellect installation folder >\Modules\CPD_RawResults\idDetector\NotFound – frames with no data for recognition.If value = 0, then frames are not saved.
  • For CARMEN Auto the results are stored to the <Intellect>\Modules\CarmenResults\idDetector\ folder. The results are represented by pairs of files: ‘<recognition time in UTC format>.bmp’ file (with a frame to be recognized) and xml file with settings of the recognizer and recognition results.

  • If the module is restarted, the Apply button is clicked or 5000 files are saved, then the specified folder and the data in it are automatically deleted and the folder is recreated. 

When value = 1, frames are not saved.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

TrackOnlyRedLight0, 115.1When value = 1, the key allows fixing violations by the traffic violations detection (crossing the stop line, stop over crosswalk line, running a red light) only for vehicles which crossed the stop line on red light.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

MaxStoppingSpeed0 - 1000010005.1Controls maximal speed in relative units (relatively from width and height of frame) at which the vehicle is still considered as the stopped vehicle (for the Stop over crosswalk line violation).

x32: (x32)\URMLPR
x64: (x64)\URMLPR

RayHardwareDelay>005.2

Sets time (in milliseconds) corresponding to the delay with which events about green/red traffic lights are received.

Example. If the key value is RayHardwareDelay=2000 and an event is received at 12:00:00, then the system thinks the event is received at 11:59:58.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

TimestampFontSize>=1391395.2The key sets the text font size on the photo of the fine (containing date and time). The value is font size multiplied by 10. For instance, if the key is 139, then the font size will be 13,9pnt.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

ReadRayFromTitles0, 105.3

The key enables the multi-stream mode emulation in IntLab.

0 – license plates recognition is performed when the ray, specified on the settings panel of the IntLab-Carriages module object, is open or closed (see Setting up the IntLab-Carriages module).

1 – information about the time when the license plates recognition is to be started is taken from the titles overlaid on the video.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

ReadRayFromTitles0, 105.5

The key includes the multichannel mode emulation for the IntLab module.

0 –  LP number recognition is carried out using macro specified on the IntLab module object settings panel (see Setting up the IntLab module).

1 –  when it is necessary to start the LP number recognition, the information on the time of occurrence is taken from subtitles added to a video.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

PlateImprover0, 1, 205.3

The key sets an algorithm of frame preparation before sending it to the Carmen license plate recognition module:

0 – frames are sent to the Carmen license plate recognition module without pre-processing.

1 – rectangular areas that may contain a license plate are searched in the frame. Only those rectangular areas that may contain a license plate are then forwarded to the Carmen license plate recognition module.

2 – if any rectangular area that may contain a plate number is detected on the frame, the frame in whole is forwarded to the Carmen license plate recognition module. If the Carmen license plate recognition module detects a license plate, it tries to find another plate number, and time for recognition increases as a result.

3 – if any rectangular area that may contain a plate number is detected on the frame, the frame in whole is forwarded to the Carmen license plate recognition module. If the Carmen license plate recognition module detects a license plate, it does not try to find another license plate.

0, 1, 2, 35.4

x32: (x32)\URMLPR
x64: (x64)\URMLPR

 SpeedField"FASTEST", "STRONGEST""FASTEST"5.4

"FASTEST" – a speed trap sends speed of the fastest object to the Intellect software

"STRONGEST" – a speed trap sends speed of the biggest object to the Intellect software

Important! If values other than above are specified for the key, the Intellect software does not recieve speed data from speed traps.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

RemoteLpr.NearestTimeFull path to local or network folder05.3

The key specifies the time difference (in milliseconds) between the moments of receiving the frame and license plate recognition event, sufficient to allow these events to be linked. The key is to be in use if data about recognized license plates are not displayed on the On-line monitor in Auto Intellect, although there are recognition events in the Debug window.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

RemoteLpr.x.NearestTime

X is the object identifier of the LP recognition channel in the Intellect software.

>=0

-5.5

For the specified object of the LPR channel with the assigned remote recognition module, the key sets the time difference in milliseconds between the moments of receiving the frame and event on the LP recognition enough to bind these events. You should use the key if the data on the recognized LPs are not displayed in the Active Monitor of the Auto Intellect although they are found in the Debug window and Event protocol.

x32: (x32)\URMLPR
x64:(x64)\URMLPR
LprDB.Path0, 1C:\ProgramData\AxxonSoft\LprDB5.5Specifies the local or network folder for storing the recognized LP images and vehicle images if the LprDB.Use key value 1 (see below) is specified.
x32: (x32)\URMLPR
x64:(x64)\URMLPR
LprDB.Use0, 115.5

Specifies the way of storing images.

0 – metadata and images are stored only in the database.

1 – metadata is stored in the database, and images are stored in the local or network folder. Full path to the folder is specified by the LprDB.Path key (see above).

Note. Recognized LP numbers information is stored in the database regardless of the LprDB.Use key.

x32: (x32)\URMLPR
x64:(x64)\URMLPR
LprDB.FreeMB>050005.5

Specifies the amount of free storage space in a directory. When its limit is exceeded, the overwriting process starts, rewriting the oldest images with the most recent ones. The key is used if the LprDB.Use key value is 1 (see above).

x32: (x32)\URMLPR
x64: (x64)\URMLPR
AutoUragan.SDKVersion3.5, 3.73.55.5 

The key sets the SDK version which is being used in the Auto-Uragan software module.

Note. It is applied to all activated Auto-URAGAN software modules in Auto-Intellect.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
AutoUragan.Parallel0, 105.5

The key activates the LP numbers recognition simultaneously on several CPUs using parallel computing, which increases the performance of the Auto-URAGAN software module.

Note. It is applied to all activated Auto-URAGAN software modules in Auto-Intellect.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
AutoUragan.Kernels>=115.5

The key sets the number of CPUs that will be used for parallel computing by the Auto-URAGAN software module, if the parallel computing is activated.

Note. It is applied to all activated Auto-URAGAN software modules in Auto-Intellect.

x32: (x32)\URMLPR
x64:(x64)\URMLPR
VIT.TimeoutLostNumber>=005.5

The key enables the tracking of the recognized number disappearance and sets the time in milliseconds, after which the lost number event will be generated if this number has disappeared from the camera field of view.

0 - tracking of the recognized number disappearance is disabled.

>1 - after the specified time has passed, if the recognized number disappeared from the camera field of view, a lost number event will be generated.

x32: (x32)\URMLPR
x64:(x64)\URMLPR
SaveFilterToDB0, 115.5 

The key enables saving the filtered numbers to the database.

0 - filtered numbers are saved to the database.

1 - filtered numbers are not saved to the database.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
RemoveNewLine0, 115.5 

The key activates the display of two-line numbers in the Event Log in two lines.

0 - two-line numbers are displayed in two lines.

1 - two-line numbers are displayed in one line.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
RestartTimeout0, 105.4

The key activates the automatic restart by the timeout for the Auto-URAGAN recognition module if no recognition results are received from it.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
IgnorePhotoFromBaseCamera0, 105.2

The key disables the receiving of photos from the main cameras of the recognizers.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
ExpiredPlateNumberMinutes>=055.2

The key sets the time in minutes, after which the violation detected by the main recognizer is ignored if the second recognizer, which is paired with the main one, also detected a violation.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

Compress0, 115.2The parameter is intended for disabling compression when transferring video from the video subsystem (the Camera object) to the LPR channel, if the video subsystem and the LPR channel are on the same local computer. This allows reducing the load on the Server processor.

0 – the video is transmitted to the local LPR channel without compression.

1 – the video is transmitted to the LPR channel after compression.
x32: (x32)\URMLPR
x64: (x64)\URMLPR
FrameBuffer>=005.4

The key sets the number of frames that are stored in the buffer for the CARMEN-Auto module. It is applicable if there is skipping of numbers, but it may cause a delay in the numbers recognition.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
FrameBuffer>=005.5

The key sets the number of unprocessed frames that are stored in the buffer for all license plate recognition modules. It is applicable if there is skipping of numbers, but it may cause a delay in the numbers recognition.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
SaveRecognitionResult0, 105.5

The key activates the saving of the number recognition result in the * .jpg format for the Seenaptec module. As a result of the module operation, the AutoRecongitionResult folder will be created at the path: <Intellect installation directory>\Modules64\, into which the files with the following names will be saved: recognizer ID in Intellect - recognized number - violation <if any>.jpg.

Note. This setting is required for debugging.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
InternalDirection0, 1, 215.5 

The key sets the mode of determining the vehicle direction of movement of the vehicle.

0 - the direction is determined by the SDK.
1 - the direction is calculated by the position of the upper part of the number. If at the start of tracking the upper part of the number is lower than the upper part of the number at the end of tracking, then the direction is defined as “From camera”, otherwise “To camera”.
2 - the direction is calculated by the area of the LP number. If at the start of tracking the area of the number is larger than at the end of tracking, then the direction is defined as “From camera”, otherwise “To camera”.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
GueTrack.Timeout>=005.5 

The key sets the waiting time in seconds required for the number to appear if the vehicle is detected several times after stopping.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
Intlab.BestFrame0, 105.5 

The key activates the mechanism for the IntLab module that displays the frame where the number is the most visible, however, it causes a time delay in the displaying of the results.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
Alarms.LimitedByBestResult0, 105.5 

The key activates the discarding of all tracks after the best frame which was defined by the recognition module.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
Alarms.CrossWalkOne0, 105.5

The key activates an alarm if there is at least one number identification at the pedestrian crossing. Vehicle traffic is not taken into account.

Note. By default, the system tries to determine the traffic on a pedestrian crossing.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
VehiclePlateSearch.Arabic0, 105.5 

The key enables the entry of an Arabic LP number in the search field.

x32: (x32)\URMLPR
x64: (x64)\URMLPR
VehiclePlateSearch.PersianCalendar0, 10

x32: (x32)\URMLPR
x64: (x64)\URMLPR
WritesAllSecondaryFrames0, 115.5 

Internal setting. Disables saving of frames from a synchronous video camera to the LprDB.Path folder and the [lprex].[dbo].[FramesSecondary] database.

0 - saving of all images from a synchronous video camera is disabled.

1 - saving of all images from a synchronous video camera is enabled.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

Ulpr.NumberDetectedRestartTimeout

>=005.5 

This key should be created if the LP recognition on one or more LPR channels stop from time to time. The key sets the time in minutes; if during this time no LPs were recognized, then the reaction is sent to the Intellect software core:

ULPR|N|NUMBER_DETECTED_TIMEOUT

where N is the identifier of the LPR channel object. Having received this reaction, the core re-sends the settings to the recognition module, thus emulating the Apply button click on the settings panel of the LPR channel object.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

AutoInfo.Use

0, 105.5 

The key automatically enables the display of the vehicle type in the Online Monitor window if the Vehicle Type Recognition Module (UrlServer) is activated.

0 - the detected vehicle type is not displayed in the Online Monitor window.

1 - the detected vehicle type is displayed in the Online Monitor window.

Note. The key value changes automatically.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

AutoInfo.Url

http-address
http://127.0.0.1:8091/GetAutoInfo
5.5 

The key sets the http-address for the interaction with the Vehicle Type Recognition Module (UrlServer).

x32: (x32)\URMLPR
x64: (x64)\URMLPR
UrlServerFrameBufferWhole numbers-15.5 

The key sets the number of frames that are stored in the buffer for the Vehicle Type Recognition Module (UrlServer). It is defined as the approximate time spent by the vehicle in the frame multiplied by the fps of video.

If 0 - then the MMR (VIT) works.

If < 0 - then the Vehicle Type Recognition Module (UrlServer) works with the 350 value.

If > 0 - then the Vehicle Type Recognition Module (UrlServer) works with the specified value.

x32: (x32)\URL_SERVER
x64: (x64)\URL_SERVER
SavePicturesString value-5.5 

The key specifies the folder into which the frames processed by the Vehicle Type Recognition Module (UrlServer) will be saved (cropped frames containing only the vehicle). These frames are necessary for training a neural network.

x32: (x32)\URL_SERVER
x64: (x64)\URL_SERVER

VehiclePlateSearch.RightToLeft

0, 115.5 

When using the CARMEN-Auto software module and the Arabic license plate numbers recognizer, the key sets the sequence of Latin numbers and letters in the second line of the recognized LP number displayed in the Online monitor.

0 - Latin numbers are displayed first, then letters.

1 - Latin letters are displayed first, then numbers.

x64: (x64)\URMLPRIntlabSDKx32PathString valueC:\Program Files (x86)\Intlab5.5

The key specifies the folder in which the Intlab x32 SDK is installed.

x64: (x64)\URMLPRIntlabSDKx64PathString valueC:\Program Files\Intlab5.5

The key specifies the folder in which the Intlab x64 SDK is installed.

...

ATM-Intellect

Registry section

String parameter

Available values

Default

Product version

Description

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

PeakWorkingSetSizeQuota

>=0

100

from 8.0


The maximum memory size in megabytes used by the process videosrv.exe on ATM-Intellect Pro. If the parameter is set to 0, then the check for the used memory is not performed.

Once a day, the ATM-Intellect Prochecks the size of the memory it uses. The check is performed at the time specified by the TimeOfCheckWorkingSetSize key (see below).

After exceeding the specified value, the videosrv.exe module is rebooted.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

TimeOfCheckWorkingSetSize

>=0

3

from 8.0

Time to check memory usage in hours. Default value is 3 (3:00 AM). See also the PeakWorkingSetSizeQuota key description above.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

StoreVideoFiles

>0

3

from 5.0

Time period for storage of not completely downloaded files on ATM-Intellect Pro. After the storage period is exceeded, the not completely downloaded files are deleted.


x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)


run_intellect


0.1


1


from 5.0

The key sets the ATM-Intellect Pro actions in case if the Intellect software is shut down.

0 – do not start the Intellect software

1 – start the Intellect software




x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)




socket_connect_tout




>=0




0




from 5.0

The key defines TCP/IP connection mode with ATM-Intellect Workstation.

0 – blocking mode. ATM-Intellect Pro connects to ATM-Intellect Workstation without specifying connection timeout.

>0 – non-blocking mode. ATM-Intellect Pro connects to ATM-Intellect Workstation with a connection timeout set by the socket_connect_tout > 0 parameter in seconds.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

write_buffer_enable

0.1

1

from 7.0

Data buffering while recording on disc when receiving video data on ATM-Intellect Workstation. ATM-Intellect Pro transfers video data to ATM-Intellect Workstation in packages of 800 to 4096 bytes (4096 by default). When buffering is enabled, a 264 Kb block of memory is allocated to the ATM-Intellect Workstation for receiving video data, and data is saved to the disk when this memory block is full, not every time a packet is received from ATM-Intellect Pro.

0 – buffering is enabled.

1 – buffering is disabled.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

stop_data_by_trx

0.1

1

from 5.0

The key determines the actions of ATM-Intellect Pro in case if, during the transfer of video data to ATM-Intellect ARM, a financial transaction has begun on the ATM.

0 – video data transfer is not stopped.

1 – video data transfer is suspended until financial transaction if completed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

IPPort> 07755from 5.0

The key specifies the port on the ATM-Intellect Workstation used for connecting the clients.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

financial_trx_tout

>0

60

from 7.0

Timeout for waiting for the financial transaction to complete in minutes. If after the start of the financial transaction during the time-out, there is no message from the ATM about its end, it will be considered to be completed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

OldLogPanel0, 10from 11.0

The key changes the Log Panel interface color theme.

0 - dark interface theme.

1 - light interface theme.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

StreamViewerExportPathText<Intellect installation directory>\exportfrom 11.0

The key specifies the path to the catalog of frames and video clips which were exported from the Monitoring interface during the live and archive video playback from a certain camera.

See Playing back live video and archive from a specific camera.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

MonitoringReserving0, 10from 11.0

The key removes the restriction on adding the same cameras for tracking in different Surveillance Objects.

0 - the restriction is enabled.

1 - the restriction is removed.

x32: HKLM\SOFTWARE\BitSoft\MonitorSSTV\Loader

x64: HKLM\SOFTWARE\Wow6432Node\BitSoft\MonitorSSTV\Loader

UseBulkInsert0, 1
from 10.0

The key accelerates the speed of data loading from files to the MonitorSSTV database by activating the group operator of data loading if the database is installed locally.

0 - do not use the BULK INSERT operator (if the SQL Server is remote)
1 - use the BULK INSERT operator (if the SQL Server is local)

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

PrefixForTimeOutText-only 10.0The key specifies the prefix in the identifier of the Surveillance Objects for which the waiting timeout specified in the TimeoutForPrefix key should be specified.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

TimeoutForPrefix>06on;y 10.0The key sets the waiting timeout in minutes for the ATM-Intellect Workstation to receive the packets with the technical state of ATM-Intellect Pro. After this time the "No connection" error will be displayed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

UsingTimeoutForPrefix0, 10only 10.0The key enables the waiting timeout set in the TimeoutForPrefix key for all Surveillance objects with the identifier prefix specified in the PrefixForTimeOut key.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

PostfixForTimeOutText-from 11.0The key specifies the postfix in the identifier of the Surveillance Objects for which the waiting timeout specified in the TimeoutForPostfix key should be specified.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

TimeoutForPostfix>06from 11.0The key sets the waiting timeout in minutes for the ATM-Intellect Workstation to receive the packets with the technical state of ATM-Intellect Pro. After this time the "No connection" error will be displayed.
HKEY_CURRENT_USER\SOFTWARE\BitSoft\MonitorSSTVMAXRECORDSONPAGE1,000 - 2,000,000,00010,000from 11.0Sets the maximum number of events to be displayed in the Event Log window without navigation buttons.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

LastLoadThreshold >= 030from 11.0

The key sets the time in minutes, after which, if the data in the MonitorSSTV database is outdated, the corresponding indication on the ATM-Intellect Workstation will appear.

Restricting the Operator’s access to the camera's functional menu and its options

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_DISABLE_OPTION0, 10from 11.0

The key hides the camera's menu.

0 - The menu is displayed.

1 - The menu is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_ARM_DISABLE_OPTION0, 10from 11.0

The key hides the Arm menu option.

0 - The Arm menu option is displayed.

1 - The Arm menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_REC_DISABLE_OPTION0, 10from 11.0

The key hides the Start recording menu option.

0 - The Start recording menu option is displayed.

1 - The Start recording menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_CAMS_DISABLE_OPTION0, 10from 11.0

The key hides the Camera menu option.

0 - The Camera menu option is displayed.

1 - The Camera menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_TITLES_DISABLE_OPTION0, 10from 11.0

The key hides the Show titles menu option.

0 - The Show titles menu option is displayed.

1 - The Show titles menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_DISABLE_OPTION0, 10from 11.0

The key hides the Processing menu option.

0 - The Processing menu option is displayed.

1 - The Processing menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_EXPORT_DISABLE_OPTION0, 10from 11.0

The key hides the Export menu option.

0 - The Export menu option is displayed.

1 - The Export menu option is hidden.

Restricting the Operator’s access to the Processing menu within the camera's functional menu

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_DEINTERLACE_DISABLE_OPTION0, 10from 11.0

The key hides the Deinterlacing menu option.

0 - The Deinterlacing menu option is displayed.

1 - The Deinterlacing menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_ZOOM_DISABLE_OPTION0, 10from 11.0

The key hides the Zoom-in menu option.

0 - The Zoom-in menu option is displayed.

1 - The Zoom-in menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_CONTRAST_DISABLE_OPTION0, 10from 11.0

The key hides the Contrast menu option.

0 - The Contrast menu option is displayed.

1 - The Contrast menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_MASK_DISABLE_OPTION0, 10from 11.0

The key hides the Detector mask menu option.

0 - The Detector mask menu option is displayed.

1 - The Detector mask menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_SHARPNESS_DISABLE_OPTION0, 10from 11.0

The key hides the Sharpen menu option.

0 - The Sharpen menu option is displayed.

1 - The Sharpen menu option is hidden.

Restricting the Operator’s access to the CamMonitor component buttons

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

BUTTON_ARCH_DISABLE_OPTION0, 10from 11.0

The key hides the Archive button.

0 - The Archive button is displayed.

1 - The Archive button is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

BUTTON_TIME_DISABLE_OPTION0, 10from 11.0

The key hides the time.

0 - The time is displayed.

1 - The time is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

BUTTON_NAME_DISABLE_OPTION0, 10from 11.0

The key hides the camera name.

0 - The camera name is displayed.

1 - The camera name is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

BUTTON_MENU_DISABLE_OPTION0, 10from 11.0

The key hides the Menu button.

0 - The Menu button is displayed.

1 - The Menu button is hidden.

Restricting the Operator’s access to the CamMonitor control via the keyboard and mouse

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

KEYS_DISABLE_OPTION0, 10from 11.0

The key disables the control over the CamMonitor component using the hotkeys available for Video Monitor (see Video Monitor).

0 - The control over the CamMonitor component using the hotkeys is enabled.

1 - The control over the CamMonitor component using the hotkeys is disabled.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

TELEMETRY_ENABLE_OPTION0, 10from 11.0

The key enables the Telemetry control using the CamMonitor component (see Telemetry control).  

0 - The Telemetry control using the CamMonitor component is disabled

1 - The Telemetry control using the CamMonitor component is enabled.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

ARCH_DELETE_ENABLE_OPTION0, 10from 11.0

The key activates the Delete menu item which is used to remove the recordings from the archive. It is used only in Intellect version 4.11 and higher (see Deleting video recordings from the archive).

0 - The Delete item is hidden.

1 - The Delete item is displayed.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

ARCH_PROTECT_ENABLE_OPTION0, 10from 11.0

The key activates the Protect menu item which is used to protect the archive recordings from rewriting. It is used only in Intellect version 4.11 and higher (see Protection of separate record and disable of protection).

0 - The Protect item is hidden.

1 - The Protect item is displayed.

...

Monitoring

Registry section

String parameter

Available values

Default

Product version

Description

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

LPRDBsearchresultUnicodeBase64

0, 1

1

8.0

The key sets how to process message in param0<> for the SEARCH_RESULT event of the LPRDB ("External database") object – as ANSI line or Unicode line additionally encoded in base64.

0 – ANSI

1 – UnicodeBase64


x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

PeakWorkingSetSizeQuota

>=0

100

from 8.0


The maximum memory size in megabytes used by the process videosrv.exe on  Agent of Control. If the parameter is set to 0, then the check for the used memory is not performed.

Once a day, the  Agent of Controlchecks the size of the memory it uses. The check is performed at the time specified by the TimeOfCheckWorkingSetSize key (see below).

After exceeding the specified value, the videosrv.exe module is rebooted.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

TimeOfCheckWorkingSetSize

>=0

3

from 8.0

Time to check memory usage in hours. Default value is 3 (3:00 AM). See also the PeakWorkingSetSizeQuota key description above.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

StoreVideoFiles

>0

3

from 5.0

Time period for storage of not completely downloaded files on  Agent of Control. After the storage period is exceeded, the not completely downloaded files are deleted.


x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)


run_intellect


0.1


1


from 5.0

The key sets the  Agent of Control actions in case if the Intellect software is shut down.

0 – do not start the Intellect software

1 – start the Intellect software




x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)




socket_connect_tout




>=0




0




from 5.0

The key defines TCP/IP connection mode with  Server of Control.

0 – blocking mode.  Agent of Control connects to  Server of Control without specifying connection timeout.

>0 – non-blocking mode.  Agent of Control connects to  Server of Control with a connection timeout set by the socket_connect_tout > 0 parameter in seconds.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

write_buffer_enable

0.1

1

from 7.0

Data buffering while recording on disc when receiving video data on  Server of Control.  Agent of Control transfers video data to  Server of Control in packages of 800 to 4096 bytes (4096 by default). When buffering is enabled, a 264 Kb block of memory is allocated to the  Server of Control for receiving video data, and data is saved to the disk when this memory block is full, not every time a packet is received from  Agent of Control.

0 – buffering is enabled.

1 – buffering is disabled.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

stop_data_by_trx

0.1

1

from 5.0

The key determines the actions of  Agent of Control in case if, during the transfer of video data to ATM-Intellect ARM, a financial transaction has begun on the ATM.

0 – video data transfer is not stopped.

1 – video data transfer is suspended until financial transaction if completed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

IPPort> 07755from 5.0

The key specifies the port on the Server of Control/Central Server of Control used for connecting the clients.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

financial_trx_tout

>0

60

from 7.0

Timeout for waiting for the financial transaction to complete in minutes. If after the start of the financial transaction during the time-out, there is no message from the ATM about its end, it will be considered to be completed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

OldLogPanel0, 10from 11.0

The key changes the Log Panel interface color theme.

0 - dark interface theme.

1 - light interface theme.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

StreamViewerExportPathText<Intellect installation directory>\exportfrom 11.0

The key specifies the path to the catalog of frames and video clips which were exported from the Monitoring interface during the live and archive video playback from a certain camera.

See Playing back live video and archive from a specific camera.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

MonitoringReserving0, 10from 11.0

The key removes the restriction on adding the same cameras for tracking in different Partitions of Control.

0 - the restriction is enabled.

1 - the restriction is removed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

AccessByCardEnable0, 10from 11.0

The key activates the special  mode of Monitoring operation with ACFA-Intellect, as well as the ability to customize the long alarm description.

0 - Special operation mode is off.

1 - Special operation mode is on.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

CustomisedLongAlarmNameTextObject disarmedfrom 11.0

The key changes the description of the long alarm Object disarmed in the Monitoring and Monitoring reports interface objects.

x32: HKLM\SOFTWARE\BitSoft\MonitorSSTV\Loader

x64: HKLM\SOFTWARE\Wow6432Node\BitSoft\MonitorSSTV\Loader

UseBulkInsert0, 1
from 10.0

The key accelerates the speed of data loading from files to the MonitorSSTV database by activating the group operator of data loading if the database is installed locally.

0 - do not use the BULK INSERT operator (if the SQL Server is remote)
1 - use the BULK INSERT operator (if the SQL Server is local)

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

PrefixForTimeOutText-only 10.0The key specifies the prefix in the identifier of the Partitions of Control for which the waiting timeout specified in the TimeoutForPrefix key should be specified.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

TimeoutForPrefix>06only 10.0The key sets the waiting timeout in minutes for the Server of Control to receive the packets with the technical state of Agent of Control. After this time the "No connection" error will be displayed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

UsingTimeoutForPrefix0, 10only 10.0The key enables the waiting timeout set in the TimeoutForPrefix key for all Partitions of Control with the identifier prefix specified in the PrefixForTimeOut key.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

PostfixForTimeOutText-from 11.0The key specifies the postfix in the identifier of the Partitions of Control for which the waiting timeout specified in the TimeoutForPostfix key should be specified.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

TimeoutForPostfix>06from 11.0The key sets the waiting timeout in minutes for the Server of Control to receive the packets with the technical state of Agent of Control. After this time the "No connection" error will be displayed.
HKEY_CURRENT_USER\SOFTWARE\BitSoft\MonitorSSTVMAXRECORDSONPAGE1,000 - 2,000,000,00010,000from 11.0Sets the maximum number of events to be displayed in the Event Log window without navigation buttons.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

PassiveModeForFTP 0, 11from 11.0

The key sets the operation mode of the Central Server of Control software via FTP.

0 - Active mode.

1- Passive mode.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

PeriodRequestOfStatistic> 05from 11.0

The key sets the statistics polling period in minutes for the Servers of Control.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

LogArchPeriod> 0168from 11.0

The key sets the log archiving period in hours of the Communication module (CentralNetServer.log)

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

LogMaxSize> 0100from 11.0

The key sets the maximum size of the communication module log file at which it begins to archive ignoring the LogArchPeriod parameter.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

LogArchDelPeriod> 03from 11.0

The key sets the log files archive retention period in months (CentralNetServer.log).

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

KeepDB> 06from 11.0

The key sets the data retention period of closed errors and alarms in the Server SSTV DB.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

LastLoadThreshold >= 030from 11.0

The key sets the time in minutes, after which, if the data in the MonitorSSTV database is outdated, the corresponding indication on the Server Of Control/CSC will appear.

Restricting the Operator’s access to the camera's functional menu and its options

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_DISABLE_OPTION0, 10from 11.0

The key hides the camera's menu.

0 - The menu is displayed.

1 - The menu is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_ARM_DISABLE_OPTION0, 10from 11.0

The key hides the Arm menu option.

0 - The Arm menu option is displayed.

1 - The Arm menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_REC_DISABLE_OPTION0, 10from 11.0

The key hides the Start recording menu option.

0 - The Start recording menu option is displayed.

1 - The Start recording menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_CAMS_DISABLE_OPTION0, 10from 11.0

The key hides the Camera menu option.

0 - The Camera menu option is displayed.

1 - The Camera menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_TITLES_DISABLE_OPTION0, 10from 11.0

The key hides the Show titles menu option.

0 - The Show titles menu option is displayed.

1 - The Show titles menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_DISABLE_OPTION0, 10from 11.0

The key hides the Processing menu option.

0 - The Processing menu option is displayed.

1 - The Processing menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_EXPORT_DISABLE_OPTION0, 10from 11.0

The key hides the Export menu option.

0 - The Export menu option is displayed.

1 - The Export menu option is hidden.

Restricting the Operator’s access to the Processing menu within the camera's functional menu

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_DEINTERLACE_DISABLE_OPTION0, 10from 11.0

The key hides the Deinterlacing menu option.

0 - The Deinterlacing menu option is displayed.

1 - The Deinterlacing menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_ZOOM_DISABLE_OPTION0, 10from 11.0

The key hides the Zoom-in menu option.

0 - The Zoom-in menu option is displayed.

1 - The Zoom-in menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_CONTRAST_DISABLE_OPTION0, 10from 11.0

The key hides the Contrast menu option.

0 - The Contrast menu option is displayed.

1 - The Contrast menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_MASK_DISABLE_OPTION0, 10from 11.0

The key hides the Detector mask menu option.

0 - The Detector mask menu option is displayed.

1 - The Detector mask menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

MENU_PROCESSING_SHARPNESS_DISABLE_OPTION0, 10from 11.0

The key hides the Sharpen menu option.

0 - The Sharpen menu option is displayed.

1 - The Sharpen menu option is hidden.

Restricting the Operator’s access to the CamMonitor component buttons

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

BUTTON_ARCH_DISABLE_OPTION0, 10from 11.0

The key hides the Archive button.

0 - The Archive button is displayed.

1 - The Archive button is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

BUTTON_TIME_DISABLE_OPTION0, 10from 11.0

The key hides the time.

0 - The time is displayed.

1 - The time is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

BUTTON_NAME_DISABLE_OPTION0, 10from 11.0

The key hides the camera name.

0 - The camera name is displayed.

1 - The camera name is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

BUTTON_MENU_DISABLE_OPTION0, 10from 11.0

The key hides the Menu button.

0 - The Menu button is displayed.

1 - The Menu button is hidden.

Restricting the Operator’s access to the CamMonitor control via the keyboard and mouse

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

KEYS_DISABLE_OPTION0, 10from 11.0

The key disables the control over the CamMonitor component using the hotkeys available for Video Monitor (see Video Monitor).

0 - The control over the CamMonitor component using the hotkeys is enabled.

1 - The control over the CamMonitor component using the hotkeys is disabled.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

TELEMETRY_ENABLE_OPTION0, 10from 11.0

The key enables the Telemetry control using the CamMonitor component (see Telemetry control).  

0 - The Telemetry control using the CamMonitor component is disabled

1 - The Telemetry control using the CamMonitor component is enabled.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

ARCH_DELETE_ENABLE_OPTION0, 10from 11.0

The key activates the Delete menu item which is used to remove the recordings from the archive. It is used only in Intellect version 4.11 and higher (see Deleting video recordings from the archive).

0 - The Delete item is hidden.

1 - The Delete item is displayed.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

ARCH_PROTECT_ENABLE_OPTION0, 10from 11.0

The key activates the Protect menu item which is used to protect the archive recordings from rewriting. It is used only in Intellect version 4.11 and higher (see Protection of separate record and disable of protection).

0 - The Protect item is hidden.

1 - The Protect item is displayed.

...