Page History

1

Identification number*

Automatically

Displays the identification number of the RTSP Server object in the digital video surveillance system

Sequence of numbers

-

Depends on the number of the RTSP Server objects in the digital video surveillance system

2

Name*

Enter the value into the field

Sets the name of the RTSP Server object in the digital video surveillance system

Latin, Cyrillic and service characters

RTSP Server

A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive.

Number of characters—from 1 to 60

3

Disable

Set the checkbox

Sets the state (enabled or disabled) of the RTSP Server object in the digital video surveillance system

Boolean type

Clear

Set—the RTSP Server object is disabled and isn't used

Clear—the RTSP Server object is enabled and used

4

Computer

Select the value from the list

Sets the Computer parent object to which the given RTSP Server object belongs

Names of the Computer objects registered in the system

Name of the Computer parent object

Depends on the number of Servers in the digital video surveillance system with the distributed architecture

5

Cameras

Set the checkbox

Specifies the cameras the video signals from which should be transmitted to remote workstations

Boolean type

Set—the video stream can be viewed at a remote workstation

Clear—the video stream cannot be viewed at a remote workstation

Gate

Select the value from the list

Specifies the Videogate through which video is received from the camera

Names of the Videogate objects registered in the system

-

Depends on the number of the Videogate objects registered in the system

Sets the port via which a video signal from the camera will be transmitted.

Note. This column is available only if is the Multicast checkbox is set (12).

Specified ports are not addressed directly. Use the RTSP port to get video from all cameras in the Multicast mode (1014)

Any available unused port numbers.

The number of ports is specified by the system administrator

Set—the video is transmitted in the "unicast" mode

Clear—the video isn't transmitted in the "unicast" mode

10

RTSP port

Enter the value into the field

Sets the port via which the video signal will be transmitted

Sequence of numbers

554

Any available unused port numbers.

The number of ports is specified by the system administrator

11

HTTP port

Enter the value into the field

Sets the port which should be used for transmitting the video signal via the http protocol

Sequence of numbers

8081

Any available unused port numbers.

The number of ports is specified by the system administrator

12

Multicast

Set the checkbox

Enables the video transmission via different RTSP ports.

The Multicast mode allows reducing the Server load by reducing the amount of the transmitted data

Boolean type

Set—the video is transmitted in the "multicast" mode

Clear—the video isn't transmitted in the "multicast" mode

13

Receiver IP address

Enter the value into the field

Sets the IP address from which the video will be transmitted in the Multicast mode

IP address

224.0.1.150

From 224.0.0.0 to 239.255.255.255

Enter the value into the field

Sets the port number via which the video signal will be transmitted in the Multicast mode. When requesting the video data from the camera using the RTSP protocol, it is necessary to specify this port. The system forwards the request to the port of the requested camera

Sequence of numbers

555

Any available unused port numbers.

The number of ports is specified by the system administrator