Versions Compared

Old Version 13

changes.mady.by.user Yulia Morozova

Saved on

compared with

New Version 14

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note
titleAttention!
  • The local version of AxxonNet cannot be installed together with Axxon PSIM, because the CassiniService service is started during Axxon PSIM installation. This service runs on port 8081, the same port as the nginx service of the local version of AxxonNet.
  • Prior to the Before installation, make sure that ports 80 and 443 are free in the system. Port 80 is used by the Web-Server by default (see Configuring the Web-Server).
  • You can install local cloud on port 80 or port 8082 using the HTTP protocol. If port 80 is free, then local cloud will be installed on it. In this case, in order to access the cloud via web and add servers to it, it is necessary to provide access to port 80 from client devices or from the connected Axxon One Server. If port 80 is occupiedbusy, then local cloud will be installed on port 8082. In this case, it is necessary to provide public access to two ports: 8082 and 8888.
  • Before installation, make sure that port 8080 is free in the system. By default, port 8080 uses the Virtual input (see Configure virtual inputs). If port 8080 is busy, the domain synchronization with the local version of AxxonNet isn’t possible.
  • AxxonData is incompatible with the Failover Server and Client installation type of Axxon One.

...

  1. Download the distribution kit using the link.
  2. Run the AxxonData installer as an Administrator.
  3. Select the installation language and click OK.
  4. Click Next.
  5. Select the installation directory and click Next.

  6. Select the access protocol for local cloud and click Next.

    Note
    titleAttention!
    • If you install AxxonData using the HTTPS access protocol, then it will not be possible to upgrade it to HTTP later. HTTP protocol is available starting from Axxon One 1.9.
    • If you select HTTPS, the local version of AxxonNet will be installed in a standard way using a certificate. If you select HTTP, the local version of AxxonNet will be installed without encryption using port 80. If port 80 is occupied busy (for example, if the Axxon One Server is running at the time of installation), you will be prompted to use port 8082:

      If you release port 80 (for example, by changing the port of the Axxon One Web-Server), then AxxonData will be installed on port 80.


  7. To send email notifications, set the SMTP server settings. If you do not want to send notifications, you can skip this step. To set up an SMTP server, do the following:
    1. In the Server address field, enter the SMTP Server for outgoing mail.
    2. In the Server port field, enter the port number used by the outgoing mail Server.
    3. In the User name field, enter the name of the account used to send messages on the outgoing mail Server.
    4. In the Password field, enter the password for the account on the outgoing mail Server.
    5. Click Next.
  8. Click Next.
  9. Click Install.

    AxxonData installation will start on your computer:
  10. Click Finish.
  11. Restart the computer.

...