Page History

...

1. Go to the External source tab (1) on the settings panel of the Face Detection object.
   

2. From the Combined work drop-down list (2), select the combined operation mode:

   • No − —combined operation mode is not used;

   • Combine with thermal camera temperature − —receiving the temperature and coordinates of a captured face frame from the thermal camera. A photograph photo of a captured face will be obtained from the capturing camera. If this mode is selected, the following setting become available.

3. Thermal camera reply timeout (3) − —sets the timeout in seconds for receiving data from the thermal camera;

   Info
   title Note
   The FIND_PERSON event will be generated only when the temperature is received from the thermal camera or after the time specified in the Thermal camera reply timeout parameter.

   
   

4. • Get photo from thermal camera − —receiving the temperature and photos of a captured face from the thermal camera;

   • Get photo and metadata from metadata from external system − —receiving the temperature and photos of a captured face from a thermal camera or Axxon One.

5. Click Click the Apply button (4) to save the changes.