Page History

...

1. Go to the user editing in the Access Manager module (see Going to user editing).

2. In the advanced options tab, select the Hikvision extention option parameter and click the Image Removed the Image Added button. 
   Image RemovedImage Added
   The Hikvision extended user options window opens.

   Info
   title Note.
   If the Hikvision extention parameter is not isn't displayed, enable it for user accounts (Configuring fields displaying in user accounts).

   

3. Select the required Hikvision controller from the object tree (1).Set the Leader card checkbox (2) if it is necessary to activate all readers connected to this controller by the first card swipe through any of the readersobjects tree.

4. From the Card type drop-down list (3), select the card type:

   Invalid
   1. Invalid
   1. —expired card.
   2. Ordinary card
   Normal
   1. —standard card type.
   2. Disabled card
   Swiping
   1. —swiping this type of card prevents the door from locking for a time
   interval specified
   1. interval specified by the Unlock Time for Disabled Pass parameter (see Configuring the Hikvision door).
   2. Blacklist card
   When
   1. —when a blacklisted card is swiped, a system event is generated without granting access.
   2. Patrol card
   This
   1. —this type of cards can be used by supervisors.
   2. Stress card
   If
   1. —if a user is under duress, this card opens the door and generates a duress alarm.
   2. Super card
   This
   1. —this card opens all doors of
   a given
   1. a given controller/terminal within
   a
   1. an active time zone
   defined by
   1. specified for user's access level.
   2. Visitor card
   The
   1. —the card is intended for visitors. You can set the maximum number of swipes for this card in the Max count of swipe field (see step 6).
      Image Added
      

      
      

5. Set the Leader card checkbox (2) if it is necessary to activate all readers connected to this controller/terminal by the first card swipe through any of the readers.

6. Set a limit for a number of Visitor card swipes in the Max count of swipe field (4).

   Info

   title	Note.

   field. The maximum number of swipes must be in the range from 0 to 255. The 0 value means that there are no restrictions on the number of swipes.

7. Specify a card password in the Auth. pass field (5).  The The password consists of 4 to 8 digits.

   Info

   title	Note

   The availability of this parameter setting depends on the Hikvision controller/terminal model.

8. Check the boxes for the required card groups in the (6) fieldFrom the Verify mode drop-down list, select the mode in which the user's card works.

   Info
   title Note
   For the correct operation, the device must support the selected verification mode.

   
   

9. In the card group area, select the required card groups by setting the checkboxes next to them. The availability of this parameter setting depends on the Hikvision controller/terminal model.
   Image Added
10. Click the Apply button (7) to save the changes.

...

1. Image Added button to apply the settings and return to the user editing menu.
2. In the user editing menu, click the Save Image Added button to save the changes.