Page History

...

To configure the Hikvision alarm input, do the following:

1. Go to the settings panel of the Hikvision 26X Alarm input object's settings panel.
   Image Modified
2. In From the Number drop-down list (1),  you see the alarm input's ID number corresponding to its ID , in the range from 1 to 4, select the number that corresponds to the number of the alarm input in the Hikvision controller. You can not change this value. 
   Image Added
3. In the Zone name field (2) field, enter the name of the alarm input name under which it will further appear that will be displayed in Axxon PSIM during subsequent readings of the controller configuration.

4. Select a detector type from From the Detector type drop-down list (3), select the detector type:

   1. Emergency Switch
   Emergency switch sensor
   1. —emergency switch detector (default).
   2. Door Magnetic
   Door MagneticSmoke
   1. —door magnetic detector.
   2. Smoke—smoke detector.
   Smoke sensor
   2. Active Infrared
   Active
   1. —active infrared
   sensor
   1. detector.
   2. Passive Infrared
   Passive
   1. —passive infrared
   sensor
   1. detector.
   2. Glass Break
   Glass
   1. —glass break
   sensor
   1. detector.
   2. Vibration—vibration detector.
   Vibration sensor
   1. Dual Tech. PIR
   Dual technology PIR sensorDual technology PIR sensorTriple technology PIR sensorHumidityHumidity sensorTemperatureTemperature sensorCombustible GasFlammable gas sensorOther DetectorOther type of sensor
   1. —Dual Technology PIR detector.
   2. Triple Tech. PIR—Triple Technology PIR detector.
   3. Humidity—humidity detector.
   4. Temperature—temperature detector.
   5. Combustible Gas—combustible gas detector.
   6. Other Detector—other detector.

      
      

5. From Select a zone type from the Zone type drop-down list (4), select the zone type:

   Instant zone
   1. Instant
   1. —instant zone (default).
   2. 24 Hours
   Permanently controlled
   1. —permanent zone.
   2. Door Emg. open
   Open
   1. —open emergency door zone.
   2. Door Emg. shutdown
   Inactive
   1. —shutdown emergency door zone.
   2. Shield
   ZoneProtected
   1. zone—protected zone.

      
      

6. From the Sensivity drop-down list (5), select a sensivity value the sensivity value in milliseconds: 10ms 10ms (default), 250ms, 500ms, 750ms.

7. Click the Apply button (6).

...

1. Image Added button.