Page History

The Person location tracker software module is is configured on the the settings panel of the Person location tracker object settings panel. This object is created on the basis of the the Camera object on the Hardware tab of the System settings window dialog window.

Image Modified

The Person location tracker software module is configured as follows:

1. Go to the the settings panel of the Person location tracker object settings panel.
   
2. Set the Show objects on image checkbox (1)checkbox, if it is necessary to highlight the detected object with a frame when viewing live video.

3. From the Device drop-down list (2)list, select the device where on which the neural network will operate.

4. Select the required neural network file with the tracking model (3).

5. In the Frames processed per second second [0,.016, 100] field (4), set the number of frames per second that will be processed by the detection tool.

   Note
   title Attention!
   For scene the scenes with static people, the FPS value should must be at least 2. For scene the scenes with moving people—at least 4. The larger this value, the higher the accuracy of pose detection, but the greater the CPU load. With FPS=1, the accuracy will be no less than 70%. This parameter varies depending on the object speed of movement. To solve typical tasks, FPS value from 3 to 20 is sufficient. Examples: pose detection for moderately moving objects (without sudden movements)—FPS=3; pose detection for moving objects—FPS=12.

6. In the Object life span (ms) field (5), enter the time in milliseconds in which the found object will be considered as disappeared from the frame.

7. 
   

8. Click the Settings button (6). As a result, the Detection settings window will open.
   

   1. Click the Stop video button (1) to capture the video image.

   2. Click the Area of interest button (2) and specify the area in which the Person location tracker will operate (3). The specified area will be highlighted with a red frame.
      

      Info
      title Note
      To delete the selected area, click the button.

      
      

   3. Click the OK button (4) to save the settings of the detection tool.

9. Click the Apply button (7).button on the settings panel of the Person location tracker object

10. Configure the Pose detection (see Configuring the Pose detection), the Shooter detection (see Configuring the Shooter detection), or the Shooter Handrail grip detection (see Configuring the Shooter Handrail grip detection).

Configuration of the Person location tracker software module is complete.