Page History

The Shooter detection object is created on the basis of the Person location tracker object on the Hardware tab of the System settings dialog window. 

Image RemovedImage Added

The To configure the Shooter detection is configured as follows, do the following:

1. Go to the settings panel of the Shooter detection object settings panel.
   
   Configure
2. In the perspective of the video image:

3. Click the Settings button (1). As a result, the Detection settings window will open.
   Image Removed
   

4. Click the Stop video button (1) to capture the video image (2).

Specify at least three calibration segments in different parts of the frame (3). To create a calibration segment, click and hold the left mouse button on the video image so that you can specify the necessary length size. You can change the size of the already created segments using the anchor points. The calibration segments should be located at different angles to each other depending on the scene and the distortion of the video image.
Image Removed


Info
title Note
To delete the created segment, click the Image Removed button.

5. Click the OK button (4) to save the settings of the perspective of the video image. The Detection settings window will close, and you will return to the Shooter detection object settings panel. 

6. Set the Generate alarm on camera checkbox (2) if it is also necessary to trigger an alarm on the camera by the specified pose detection.
7.  Number of frames for decision making [1, 20] field, enter the required amount of frames from 1 to 20 on which a person must be found in the shooter pose to trigger the corresponding event. The default value is 2.
8. Set the Generate alarm on camera checkbox to gererate an alarm on camera when the detection tool detects the specified pose. The checkbox is clear by default.
9. Set the Display event on screen checkbox to display an alarm border on the screen when the detection tool triggers. The checkbox is clear by default.
10. In the Alarm border color fieldIn the Alarm border color field (3), specify the color of the alarm border using the color palette. The default color is red. Double click the color field to open the Color palette. After selecting the border color, click the OK button to save the settings.
    Image Removed
    
11. In the Number of frames for decision making [1, 20] field (4), enter the required amount of frames from 1 to 20 on which the human should be found in the shooter pose to trigger the corresponding event. The default value is 2.
12. Image Added
13. Click the Apply button (5).

The Shooter detection is now configured.