Go to documentation repository
Page History
The Testing video capture cards section is designed to test the connection of the cameras to the video capture card.
| Info | ||
|---|---|---|
| ||
| To use this functionality, Axxon PSIM is to be logged off. Otherwise there is “Cards not found” message must be shut down. If it is running, the message "Cards not found" will be displayed. |
The settings panel for the Testing video capture cards section is shown in the figure.
...
No | Parameter name | Field type | Description | Representation | Default value | Value range | |||
1 | The Board dropdown list | Dropdown Drop-down list | Specifies the video capture card which camera connections are to be checked | List of video capture cards | -N/A | Depends on the number of installed video capture cards | |||
2 | The TestbuttonClick the button | Button | Starts the testing process of the video capture card. The Axxon PSIM system is to be closed at the time of testing. | - | - | N/A | N/A | N/A- | |
The Channels state table | |||||||||
3 | The Channel column | AutomaticallyColumn (set automatically) | Displays the channels numbers of the selected video capture card | - | N/A | N/A- | From 1 to 16 | ||
4 | The State column | AutomaticallyColumn (set automatically) | Displays the state of camera connections to the channels of the selected video capture cards | N/A | N/A | Attach—the Attach – camera is attached Detach – Detach—the camera is detached | |||
If the video capture card is not recognized by the tweaki.exe utility, we recommend you to check whether the camera access is allowed for applications. To do this:
- Go to Windows Settings→ Privacy→ Camera.
- Allow apps to access your camera by setting the switch to the On position as shown in the figure below.
Overview
Content Tools