Go to documentation repository
The Testing video capture cards section is designed to test the connection of the cameras to the video capture card.
Note.
To use this functionality Axxon PSIM is to be logged off. Otherwise there is “Cards not found” message.
The settings panel for the Testing video capture cards section is shown in the figure.
The parameters of the settings panel are described in the table.
No | Parameter name | Field type | Description | Representation | Default value | Value range | |
1 | The Board dropdown list | Dropdown list | Specifies the video capture card which camera connections are to be checked | List of video capture cards | - | Depends on the number of installed video capture cards | |
2 | The Test button | Click the button | Starts the testing process of the video capture card. The Axxon PSIM system is to be closed at the time of testing. | - | - | - | |
The Channels state table | |||||||
3 | The Channel column | Automatically | Displays the channels numbers of the selected video capture card | - | - | From 1 to 16 | |
4 | The State column | Automatically | Displays the state of camera connections to the channels of the selected video capture cards | Attach – camera is attached Detach – camera is detached | |||
Overview
Content Tools