Page History

To work with Axxon One, the following requirements for OpenGL must be met:

1. Version 2.0 and higher.
2. The following extensions must be available: ARB_vertex_program, GL_EXT_blend_func_separate, GL_ARB_framebuffer_object.

Extensions availability can be checked with the You can check the availability of extensions with the OpenGL Extension Viewer program (download).
This  This program also contains a large database of OpenGL support in video cards of various vendors

You cannot start Axxon One Client cannot be started client if the scale of all items on the screen (DPI) is over 100%.

If the screen resolution is set lower than 1280*960 pixels, the correct operation of Axxon One isn't guaranteed

The Server server and the Client client versions must be of the same version. If not, the correct operation of of Axxon One isn't guaranteed

For the correct operation of Axxon One, the OS must use the UTF-8 locale

In one LAN, two Servers servers with the same name are not allowed, even if they belong to different Axxon-domains.

If the name of the Client client computer and the name of the Server server computer in the LAN are the same, the correct operation of Axxon One isn't guaranteed

To install Axxon One, you must log in to Windows as an administrator

For the correct installation of Axxon One, there must be no spaces at the beginning of the name of the folder which that contains the installer

For the correct and full-feature operation of Axxon One, the system must not limit network activity between all Servers servers and Clientsclients.

If during Axxon One installation, you specified certain ports were specified, the access to these ports via the TCP and UDP protocols must be enabled. Otherwise, access to all ports must be allowed in the system.

For the Client client to operate correctly, disable unnecessary network interfaces on the Server. If you want the Server server to work with only one network interface, set its gateway and mask in the network settings utility (see Network settings utility)

To ensure proper functioning For the correct operration of Axxon One, it is imperative to employ distinct you must use different IP addresses for all network interfaces on the Server. Or utilize server, or use the interface mask to specify a designated set of addresses where the Server will operate (see Network settings utility).

Failure to maintain unique If there are identical IP addresses among on the Servers can result in complications pertaining to intercommunication among the Servers themselvesservers, there can be problems in communication between the servers, as well as between the Client client and the Serverserver

Time must be synchronized among all computers in the system (configured by the user)

If you have edge embedded storage enabled in the system, synchronization between the Server server and the IP device is necessary (see The Embedded storage object).

Lack of synchronization can lead to bad DB entries of events detected on the deviceIf there is no synchronization, events from the device can be incorrectly recorded to the database

Before installing installing Axxon One, make sure that your computer uses the latest version of the video card drivers on the computer are fully up to datedriver

NetBIOS name of a the computer must meet the following requirements:

• contains only Latin characters, digits, and
a
• the "-" character;
• does not exceed 15 characters

The Client cannot be started You cannot start the client on a remote desktop through the standard standard Remote Desktop Connection Windows utility

If a computer is connected to an Active Directory domain, one of the following conditions must be met to enable disk access:

1. Disk Access Control Lists must contain only local or
built-in
2. embedded groups and users.
3. Create an AxxonFileBrowser user in the domain and add it to the Users group (see Installation). This behavior is typical only of the file systems that have access permissions (for example, NTFS)