In Axxon One, you can link video to the objects shown on a map. The feature is available through in immersion mode (see Immersion mode).
To link a video to a map, use the four attachment points. You must link the objects in the video to their depiction on the site map of the protected facility.
To configure video image in immersion mode, do the following:
- Switch to the layout editing mode (see Switching to layout editing mode).
- Switch to immersion mode (see Immersion mode). To do this, click the camera icon on the map, its field of view, or the video display area.
- To add attachment points, left-click on
- the video image. You must add at least four attachment points.
- As soon as you add the fourth point or more, the
button can appear to calibrate attachment points on the map. The button appears if the calibration is allowed.
| Note | ||
|---|---|---|
| ||
When you set points on an image, follow the rules:
|
After you add the fourth link, an angle is chosen so that the surveillance objects in the video and on the map coincide. As soon as you add all the links, you can change the location of the set points by dragging them while holding down the left mouse button.
To remove a link, place the cursor above the first a point in the link and click the the 
button. The calibration is recalculated if you remove one point.
| Note | ||
|---|---|---|
| ||
After you update from the previous versions to the 52.1 version, the attachment points that used to link the camera to the map are discarded. You must set the attachment points again. |
To save links between the video and the map, exit layout editing mode and save the changes. The links you make are discarded if at least one of the following actions occurs before you exit and save the changes:
- Change
- change the position of the video
- camera icon on the map .
- ; Change
- change the angle of display of the video display area for the camera on the map. Change
- change the field of view of the camera on the map in any way.