Page History

1

Identification number*

Automatically

Displays the identification number of the Incident handler interface object in the video surveillance system with distributed architecture

Numbers, letters, periods, hyphen, dash, and underscore

NA

Depends on the number of the Incident handler objects in the video surveillance system with distributed architecture

2

Name*

Enter the value

in the field

Sets the name of the Incident handler object in the system

Latin, Cyrillic, and

service characters 

Incident handler

A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive.

Number of characters—from 1 to 60

3

Disable

Set the checkbox

Disables the Incident handler object 

Boolean type

Set—the Incident handler object is disabled and isn't used

Clear—the Incident handler object is enabled and used

Select the value from the list

5

Type

Select the value from the list

Available object types

Depends on the objects registered in the system.

Only those object types are available for selection for which the "INFORMATION" or "ALARM" value is selected on

the Events tab in the Processing messages

 column in the ddi.exe utility (

see The Events tab)

Number

Select the value from the list

Sequence of numbers

Depends on the number of the objects of the specified type registered in the system

Name

Automatically

Sets the name of the object for which the events in the Incident manager window

must be displayed

Names of the objects registered in the system

Depends on the objects registered in the system

Event type

Select the value from the list

Events available for the selected object

Depends on the selected object type

Area

Select the value from the list

Areas available for the selected object

Depends on the selected object type and Areas registered in the system

Region

Select the value from the list

Regions available for the selected object

Depends on the selected Area

Sets the logic that

is used to handle the events of the corresponding object.

Note. The logic

must be specified. Otherwise, the selected events

aren't displayed

A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive.

Number of characters—from 1 to 255

Autoescalation (s)

Enter the value

in the field

Sets the time in seconds from the moment the event occurs, after which the event

is automatically escalated. Autoescalation is performed within one Incident manager and works if the operator has the escalation rights

Time in seconds

>=0

№

- 

4

Select the value from the list

5

Selects the element that

is displayed first for the operator when processing the event.

To

set the checkbox, do the following:

1. Select an element in the table.
2. Click the Edit button.
3. In the Starting element drop-down list, select Yes.
4. Click the OK button

Only one element in the logic can be the starting one

Set—the element is the starting element in the logic

Clear—the element isn't a starting element in logic

6

7

Select the value from the list

• Image;
• Button;

• Switch;
• Comment

• ;
• Field with list;
• Checkboxes

• Deny—when

• the selected element appears, the operator

• can switch to processing another event until the operator moves to the element with the Allow value or completes processing the event;
• Allow—when this element appears, the operator can proceed to processing another event;
• Blank field—the multitasking setting of the previous logic element is applied to the selected element

9

Opens a window for editing the selected element (see Configuring the elements)

10

Resets the event processing

.

The option works if the administrator has changed the Logic, clicked Apply, and wants to apply the updated Logic to events in the Incident manager

Set—the event processing with the selected Logic

is reset, and the event can be processed again with the updated Logic

Clear—the Logic will change, but the started event processing job with this Logic

isn't reset. The updated Logic

is applied only to subsequent new events

№

Sets the priority description. If the priority description is set, then it

is displayed in the Incident manager, otherwise, the priority level

is displayed

A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive.

Number of characters—from 1 to 255

Sets the number of columns when displaying the event processing logic in the Incident manager interface

Sets the width of the columns when displaying the event processing logic in the Incident manager interface