Page History

...

Recursive search for the alarm layer

When you use multi-layer multilayer maps, you must specify sequential links to other layers to be able to move from the active layer to any other layer of the map. If the above condition is met, you can use recursive links when the Alarm event occurs on one of the layers. To enable recursive search of the layer with the registered Alarm event, set the Search alarmed links recursively checkbox (3) and click Apply in the settings panel of the Map interface object. If there are many layers, you can limit the Search depth for links across layers by specifying the required value in the field (4):

• empty field—search across layers is unlimited;
• 0—no search by related layers, that is, in case of alarm, only the alarm layer will blink;
• >0—indicates the number of layers through which the search is performed. For example, the map has six interconnected layers and the alarm occurs on the third layer. If the key value=1, the alarm will blink on the third layer, as well as on the second and the fourth layers.

...