Go to documentation repository
Page History
...
№ | Parameter | Method of setting the parameter value | Parameter description | Representation | Default value | Value range |
1 | Identification number* | Automatically | Displays the identification number of the User system object in the system | Digits, letters, periods, hyphen, dash, and underscore | NA | Depends on the number of the User objects in the system |
2 | Name* | Enter the value in the field | Sets the name of the User object in the system (usually the user's last name) | Latin alphabet, Cyrillic, numbersdigits, and service characters | User | A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60. Do not enter "rs" in this field when registering Operator accounts, as this value is used as a default username in Axxon PSIM Web Report System |
3 | Disable | Set the checkbox | Disables the User object in the system | Boolean type | Clear | Set—the User object is disabled and isn't used Clear—the User object is enabled and used |
4 | Department | Select the value from the list | Sets the Department parent object for the given User object | Names of the Department objects registered in the system | Name of the Department parent object | Depends on the number of the Department objects in the system |
| 5 | Name field | Enter the value in the field | Sets the user's name | Latin alphabet, Cyrillic, and service characters | NA | A line containing a sequence of any characters |
| 6 | Patronymic field | Enter the value in the field | Sets the user's patronymic | Latin alphabet, Cyrillic, and service characters | NA | A line containing a sequence of any characters |
| 7 | Phone | Enter the value in the field | Sets the user's phone number for the two-factor authentication | Phone number | NA | + [country code][city code][subscriber number]
|
| 8 | AD connection button | Click the button | Opens a window to configure the connection between the Axxon PSIM user and the Windows Active Directory user | NA | NA | NA |
| 9 | AD connection connection field | Automatically | Displays the Active Directory user identifier connected with the Axxon PSIM user | Latin alphabet and service characters | NA | Depends on the values of Active Directory identifiers |
| 10 | Additional info field | Enter the value in the field | Specifies additional information about the user. When you hover the mouse cursor over the user's photo, a pop-up window with the full content of this field is displayed | Latin alphabet, Cyrillic, numbersdigits, and service characters | NA | A line containing a sequence of any characters |
| 11 | User locked field | Set the checkbox | Enables the function of locking the User object in the system | Boolean type | Clear | Set—the User object is locked Clear—the User object is active |
| 12 | Antipassback | Set the checkbox | Enables the function of antipassback | Boolean type | Clear. Note. If you have the Access Manager module installed, the default value will depend on the module settings (see Configuring the rights to manage objects in Access Manager) | Set—Antipassback is prohibited Clear—Antipassback is allowed |
| 13 | Object code | Enter the value in the field | Sets the Object code of the access control | Latin alphabet, Cyrillic, numbersdigits, and service characters | NA | A line containing a sequence of any characters, letters, and digits Note. If you have the Access Manager module installed, the value range will depend on the module settings (see Configuring access cards) |
| 14 | Permanent card field | Enter the value in the field | Sets the number of the permanent card of the User object | Latin alphabet, Cyrillic, numbersdigits, and service characters | NA | |
| 15 | Temporary card field | Enter the value in the field | Sets the number of the temporary card of the User object | Latin alphabet, Cyrillic, numbersdigits, and service characters | NA | |
| 16 | Valid till | Enter the value in the field | Sets the date after which the validity of the temporary card of the User object is limited | Digits and service characters. Date in the format:
| NA | NA |
| 17 | PIN field | Enter the value in the field | Sets the PIN code of the user card | Latin alphabet, Cyrillic, numbersdigits, and service characters | NA | A line containing a sequence of any characters. Note. If you have the Access Manager module installed, the value range will depend on the module settings (see Configuring the user PIN code) |
| The Additional cards table | ||||||
| 18 | Object code column | Enter the value in the column | Sets an additional Object code of access control | Latin alphabet, Cyrillic, numbersdigits, and service characters | NA | A line containing a sequence of any characters. Note. If you have the Access Manager module installed, the value range will depend on the module settings (see Configuring access cards) |
| 19 | Card column | Enter the value in the column | Specifies an additional card code of access control | Latin alphabet, Cyrillic, numbersdigits, and service characters | NA | |
...
№ | Parameter | Method of setting the parameter value | Parameter description | Representation | Default value | Value range |
| 20 | Access type drop-down list | Select the value from the list | Sets the Access type for the user | List of access types | Group
|
If you set the Group access level, the user is assigned the access level of the department to which they belong |
| 21 | A.L.** drop-down list | Select the value from the list | Sets the user's Access Level | List of access types | NA | NA |
| 22 | Date1** field | Automatically | Displays the start date of the temporary Access Level. Format: DD.MM.YYYY | Digits and service characters except: < | > | NA | NA |
| 23 | Time1** field | Automatically | Displays the start time of the temporary Access Level. Format: HH:MM:SS | Digits and service characters except: < | > | NA | NA |
| 24 | Date2** field | Automatically | Displays the end date of the temporary Access Level. Format: DD.MM.YYYY | Digits and service characters except: < | > | NA | NA |
| 25 | Time2** field | Automatically | Displays the end time of the temporary Access Level. Format: HH:MM:SS | Digits and service characters except: < | > | NA | NA |
| 26 | Photo area* | Automatically | Displays a photo of the User object | Graphical representation | NA | NA |
...
** To change these parameters, you can use the Access Manager module as part of the ACFA PSIM subsystem (see Assigning a temporary access level to a user).
The Access Levels tab
№ | Parameter | Method of setting the parameter value | Parameter description | Representation | Default value | Value range |
| 27 | Login field | Automatically | Displays the Login of the user | Latin alphabet, Cyrillic, digits, and service characters | NA
| A line containing a sequence of any characters |
| 28 | Authorization parameters button | Press the button | Opens a window to change login and password | NA | NA | NA |
| 29 | Windows authorization checkbox | Set the checkbox | Enables Windows authorization option | Boolean type | Clear | Set—Windows authorization is used Clear—Windows authorization isn't used |
| 30 | User drop-down list | Select the value from the list | Selects the user from the list | The list of User objects registered in the system | NA | Depends on the number of User objects in the system |
| 31 | Change password on first access checkbox | Set the checkbox | Changes password on the first access | Boolean type | Clear | Set—change password on the first access Clear—don't change password on the first access |
| 32 | Change password every _ months checkbox | Set the checkbox | Changes password every _ months Note. If you set the Change password every _ months checkbox, the Change password on first access checkbox is set automatically | Boolean type | Clear | Set—change password every _ months Clear—don't change every _ months |
| Change password every _ months field | Enter the value in the field | Sets a certain number of months after which you must change the password | Integer numbers | 0 (not specified) | >=0 | |
| 33 | Allow password change by user checkbox | Set the checkbox | Changes password by user's request | Boolean type | Clear | Set—change password by user's request Clear—don't change password by user's request |
| 34 | Supervisor drop-down list | Select the value from the list | Sets the Supervisor that confirms the authorization of another user in the system. For more details, see Starting and shutting down the Axxon PSIM software | The list of User objects registered in the system | NA | Depends on the number of User objects in the system |
*The name of the element isn’t displayed on the settings panel of the object.
Overview
Content Tools