Page History

...

1. In the Tagtrack cameras section:
   1. Click the button.
   2. Select the required overview camera from the list. To search for a camera, enter the Short name or Name (full or partial, see Camera). This parameter is case-sensitive.
2. In the surveillance window of a PTZ camera, focus on any point:
   1. In the upper right corner, click the button.
   2. Place the cursor in the middle of the frame, hold down the left mouse button, and move the cursor so that the object that you want to track is in the center of the frame.
3. In the surveillance window of the Overview camera:
   1. Left-click the point corresponding to the current position of the PTZ camera. A Calibration point is added to the surveillance window. To delete a calibration point, click the Delete button.
   2. Set at least six calibration points in the surveillance window of the overview camera, focusing on different points in the surveillance window of the PTZ camera.
      

      Note
      title Attention!
      Setting calibration points is mandatory. Without this, the overview camera will not be bound to the PTZ camera. We recommend setting 6 to 10 points. Adding more points can improve accuracy but also increases the risk of errors, which will degrade the overall performance of the feature. The points must not be in a straight line in both the overview and PTZ cameras. They must be evenly distributed across the entire frame. All points must be in the same plane (floor, ground). We don't recommend placing points in different planes (for example, some points on the ground and others on walls or poles).

4. Click the Apply button.
5. Test the calibration:
   1. In the upper right corner from the surveillance window of the Overview camera, click the button.
   2. Click each created calibration point in the surveillance window of the Overview camera. If the PTZ camera accurately positions itself at each selected point, the calibration is correct.
6. Repeat the steps for each required surveillance overview camera.

Binding overview cameras to a PTZ camera and configuring calibration for the Tag&Track Pro feature is complete:

...