Page History

...

Function

...

The operator protocol interface is shown in the following figures.

The operator protocol interface. The Current events tab:
Image Modified

The operator protocol interface. The Search in events archive tab:

Image Modified

The operator protocol interface. The Create report tab:

Image Modified

The operator protocol interface. The Create Eventevent tab:

Image Modified

Interface elements of the operator protocol are described below.

The Current events tab

The event control panel is at the top of the Current events tab. The following elements can be found on this panel:

1. The button to switch to the archive to view and export video of the event Image Added.

2. The button to switch to the map layer where there is the source of the even Image Added.

3. The button to escalate the event Image Added.

   Info
   title Note
   If the event has got the Escalated status, then this event will be displayed in the interface of the operator protocol of the higher level. If the Escalation button is disabled, it means that no superior interface is assigned to the current Operator.

   Several superior interfaces can be assigned to the Operator protocol but escalation is performed to one of them. If more than one superior interfaces is assigned, then before clicking the Escalation button select the required Operator protocol of the higher level in the dropdown list that can be found below the Escalation button.

4. A drop-down list Image Added to group the events display by region, event, or object.
5. A checkbox Image Added to enable a simple display of events at the bottom of the Current events tab.

6. The buttons to assign the type (status) to the event Image Added. The buttons for event processing may not be available until a comment is entered if the corresponding setting is enabled. The button names can be changed during the Operator Protocol configuration. Also, if configured accordingly, the buttons may be absent when the line with the name of the event grouping is highlighted.

7. The Image Added button enables delaying event processing once for a time period specified when configuring the Operator protocol.

8. The Image Added button to open the helping guide about the event processing.

9. The field to enter a comment.

   Image Added

   The comment field also contains the information about the completed tasks from the checklist (see below). 

10. When enabling the Image Addedcheckbox

frame of alarm moment:
Image Removed

11. Information about an event:

    • system name of the event;
    • object logged the event;
    • time left before assigning the "non-processed event" type to the event or before event escalation;
    • date and time of event logging;
    • name of the Part object corresponding to the area where the event is logged;
    • information about event escalation.

    Image Removed

12. The field for a comment:
    Image Removed

13. Enabling the Image Removed checkbox, the type assigned to the corresponding event is applied to all events in the Current events tab

    The buttons of assigning the type (status) to the event. Image Removed

    Info
    title Note.
    If the event has the "Escalate" status, then it is displayed in the interface of the operator protocol of a higher level. If there is no "Escalate" button, then there is no superior interface for the current operator protocol.

    Optional parameters. Image Removed

    .

14. The Image Added checkbox is used for auto creation of the bookmark in the archive when the event is processed by the operator. The entered comment will be used as the bookmark name.

15. The checklist contains the list of actions that must be performed by the Operator during the event processing.
    Image Added

The events are displayed at the bottom of the Current events tab. The display type depends on the settings configured on the control panel. The display options:

1. If no Group by value is selected and if the Simple view option is disabled, then the bottom of the Current events tab displays the cells, each of which corresponds to one event. The number of horizontal cells is determined by the Operator protocol window width. The information on the event and the frames from the camera linked to the object from which the event is received are displayed in the cell (see Connection of objects with cameras in Administrator's Guide). The name of the corresponding camera is displayed on the frame. If there are several cameras linked to the object, you can use the Image Added buttons to browse the screenshots.

   Info
   title Note
   There is no need to configure connection between the embedded detection tool and camera in order to show the frame by events from embedded camera detection tools.

   
   Image Added Image Added

   
   The cell contains the following information:
   1. system name of the event;
   2. object registered the event;
   3. name of the Region object corresponding to the area where the event is registered;
   4. date and time of event registration;
   5. time left before the Non-processed event type is assigned to the event;

   6. information about event escalation or optional parameters.

      Info
      title Note

   .

   1. The list of optional parameters is set

   in the settings of

   1. when configuring the Operator protocol object (see

   Intellect software package. Administrator guide)
2. The button of going to the archive to view and export video of the event Image Removed

3. 1. Administrator's Guide).

      
      

4. If no Group by value is selected and if the Simple view option is enabled, then the bottom of the Current events tab displays a simplified list of events without the frames from the camera:
   Image Added
   Each line corresponds to one event and contains the following information:
   1. system name of the event;
   2. object registered the event;
   3. date and time of event registration.
5. If any Group by value is selected, then the bottom of the Current events tab displays a list of groupings by the selected parameter. The list line contains the number of events in the grouping and the name of the parameter by which the events are grouped.
   Image Added
   To view all events from the group, click on the Image Added button. To hide the grouped events, click the Image Added button:
   Image Added
   The content of the expanded group depends on whether the Simple view checkbox is set or not. If it is disabled, the events will be displayed as cells. If the Simple view checkbox is set, then a simplified list will be displayed.The button of going to the map layer where the source of event is Image Removed

The Search in events archive tab

1. Selection list of department to which operator belongs Image RemovedImage Added The list to select the department which the operator belongs to. If the field is empty, than all operators are available for choiceto select.

    

2. Image Added The list

   of selecting the operator Image Removed
   
3. The list of selecting the object Image Removed
4. The button of setting the initial date Image Removed

5. to select the operator.

6. Select the region the object corresponds to:

   Image Added

7. Enabling the filter by objects and object selection:

   The button of setting the final date Image Modified
8. The types of events by which the search is performed by:
   Image Removed
   Image Added
   
9.  The button to set the initial date Image Added.
10. The button to set the final date Image Added.
11. The button of search start Image Removedstart Image Added.
12. The button of going to switch to the archive to view and export video of the event Image Removedevent Image Added.

There is the protocol table containing the search data results at the bottom of the Search in events archive tab.

Image RemovedImage Added

The description of the protocol table is given in the table.below:

The Create report tab

1. The list of objects by the events from which the report can be created:
   Image RemovedImage Added
   
2. The list of events by which the report can be created:
   Image RemovedImage Added
   
3.  The button of setting the date after which events get into the report Image Removedreport Image Added.
4. The button of setting the date after which events do not get into the report Image Removedthe report Image Added.
5. The Image Added checkbox enables displaying an event in the report only once. If this checkbox is set unchecked, then one event will be displayed for each Operator protocol in the report.
6. The Image Added checkbox enables filtration of the events list on the right according to objects selected on the left (e.g., if only Camera objects are selected, then only Camera events are displayed).
7. The button of creating a report Image RemovedThe button to create a report Image Added.
   

The Create event tab

1. The field for description of the event:
   Image Removed Image Added.
   
2. The button of setting the date and time of the event Image RemovedImage Added.
3. Dropdown The dropdown list to select the data source typetype Image Added. Image Removed
4. The drop-down list for selecting dropdown list to select the source object of the event Image RemovedImage Added.
5. The button of creating to create an event Image Removed

...

1. Image Added.